null

Williams Furnace Company 07435 7,400 BTU High Efficiency Direct Vent Wall Furnace

Sku:
WILLIAMS-FURNACE-07435
Usually Leaves Warehouse in 3 - 5 Business Days
$1,255.00
 

​This direct-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 7,400 BTU, works to safely distribute heat throughout any indoor space at minimal cost.

Especially ideal for use in garages, workshops, and bedrooms, this unit is conveniently compact - just 6 inches deep - for ample heat wherever you need it, without the loss of space. Its sealed combustion chamber completely seals the gas flame inside the unit and away from all contact with the air in the room for added safety, operating completely electricity-free for use even during a power outage. This unit has a built in thermostat and will not work with an external thermostat.
 
This unit is a direct-vent furnace, which means that the air necessary for combustion is drawn directly into the chamber from the outside, allowing doors and windows to stay closed because no indoor air is used for combustion. The combustion products are then returned back through the vent to the outside, so that only clean, gentle, and consistent heat is delivered into the room. Direct-vent furnaces must be installed through an exterior (outside) wall, venting horizontally through the exterior wall.
  • Easy installation: All vent material included
  • Attractive, durable fresh-white finish
  • Small, low-profile vent size
  • Sealed-combustion safety technology uses no inside room air for operation
  • Air to air system offers instant heating
  • Rated for up to 2,000' elevation. For altitudes/elevations above 2,000 feet, ratings should be reduced at the rate of 4-percent for each 1,000 feet (305 m) above sea level by reducing the manifold pressure at 8% rate on the gas supply. Maximum altitude allowed for installation is 5,500 feet (1680 m).
  • Read owner's manual before using/installing
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
  • Air Inlet Pipe Diameter: 3-7/8"
  • Exhaust Pipe Diameter: 2-3/8"
  • Min. / Max. Wall Thickness: 6" / 19-1/2"
Professional installation by a certified gas technician is required for this item.
 
This item is available:
  • Natural Gas 0743512
  • Liquid Propane 0743511
FREE SHIPPING ON ALL ORDERS!
Williams Furnace Company 07435 7,400 BTU High Efficiency Direct Vent Wall Furnace

Product Overview

 

​This direct-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 7,400 BTU, works to safely distribute heat throughout any indoor space at minimal cost.

Especially ideal for use in garages, workshops, and bedrooms, this unit is conveniently compact - just 6 inches deep - for ample heat wherever you need it, without the loss of space. Its sealed combustion chamber completely seals the gas flame inside the unit and away from all contact with the air in the room for added safety, operating completely electricity-free for use even during a power outage. This unit has a built in thermostat and will not work with an external thermostat.
 
This unit is a direct-vent furnace, which means that the air necessary for combustion is drawn directly into the chamber from the outside, allowing doors and windows to stay closed because no indoor air is used for combustion. The combustion products are then returned back through the vent to the outside, so that only clean, gentle, and consistent heat is delivered into the room. Direct-vent furnaces must be installed through an exterior (outside) wall, venting horizontally through the exterior wall.
  • Easy installation: All vent material included
  • Attractive, durable fresh-white finish
  • Small, low-profile vent size
  • Sealed-combustion safety technology uses no inside room air for operation
  • Air to air system offers instant heating
  • Rated for up to 2,000' elevation. For altitudes/elevations above 2,000 feet, ratings should be reduced at the rate of 4-percent for each 1,000 feet (305 m) above sea level by reducing the manifold pressure at 8% rate on the gas supply. Maximum altitude allowed for installation is 5,500 feet (1680 m).
  • Read owner's manual before using/installing
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
  • Air Inlet Pipe Diameter: 3-7/8"
  • Exhaust Pipe Diameter: 2-3/8"
  • Min. / Max. Wall Thickness: 6" / 19-1/2"
Professional installation by a certified gas technician is required for this item.
 
This item is available:
  • Natural Gas 0743512
  • Liquid Propane 0743511

Tech Specs

General Features

Installation Type:
Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Vent Kit Included
Tilt Switch:
NA

Performance Data

Heating BTUs:
7400
Heating BTUs (Output):
5500

Venting

Type of Venting:
Direct Vent
Air Inlet Tube (in.):
3.875"
Flue Outlet Tube (in.):
2.375"

System Data

Flame Type:
NA
Blower:
Not Available
Ignition Type:
Standing Pilot
Control Type:
Thermostatic

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
3.5" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
7.0" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
NA

Clearances

Top to Ceiling (in.):
10
Bottom to Floor (in.):
2
To Side Wall (in.):
2

Weights and Dimensions

Width (in.):
18.875
Depth (in.):
6.75
Height (in.):
22.75
Net Weight (lbs.):
37
Certifications:
CSA
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov