Product Overview
A condensate removal pump is used when gravity cannot route the condensation build-up from your air conditioner properly. The condensation is collected in the pump and routed through a tube to the drainage point, whether it is a sewer, a floor drain, a window or even through the wall and outside.
The high performance DACA-CP3-1 has been engineered in partnership with and manufactured to Daikin specifications. It is for use with Daikin models up to 42000 BTUs including single and multi-zone indoor units as well as specific SkyAir units.
- Daikin Indoor Units
- FTXS09LVJU, FTXS12LVJU, FTXS15LVJU, FTXS18LVJU, FTXS24LVJU, FTXS30LVJU, FTXS36LVJU
- FTXN09KVJU, FTXN12KEVJU
- FTXN15KVJU, FTXN18KVJU, FTXN24KVJU
- FTXG09HVJU, FTXG12HVJU, FTXG15HVJU
- CTXS07HVJU, CTXS09HVJU, CTXS12HVJU
- CTXS007LVJU
- FDXS09DVJU, FDXS12DVJU
- FDXS09LVJU, FDXS12LVJU
- CDXS15LVJU, CDXS18LVJU
- SkyAir Indoor Units:
- FTXS30LVJU, FTXS36LVJU
- FHQ18PVJU, FHQ24PVJU, FHQ30PVJU,
- FHQ36MVJU, FHQ42MVJU
- FAQ18PVJU, FAQ24PVJU
- VRV Indoor Units:
- FXHQ12MVJU, FXHQ24MVJU, FXHQ36MVJU
- FXLQ12MVJU, FXLQ18MVJU, FXLQ24MVJU
- FXNQ12MVJU, FXNQ18MVJU, FXNQ24MVJU
- FXAQ07PVJU, FXAQ09PVJU, FXAQ12PVJU, FXAQ18PVJU, FXAQ24PVJU
It is suitable for air-conditioning units up to 3.5 tons. The piston technology is specifically designed for removing condensates from air conditioning systems. The Si-30 is fully reliable, in any kind of environment. Its operating sound level will remain silent whatever the volume of condensates. It also boasts a low noise level (20 dBA) and small size with a low maintenance filter-free detection system.
This mini pump can be used with air conditioners up to 5.6 tons (67 kBTU - 20 kW), wall split systems, consoles, fan coils, ceiling suspended units and ducted units.
- High resistance to pollution created by general environment. Capable of discharging small particles
- Proven reliability
- Silent
- Quiet in operation: 20 dBA independently tested.
- The size of the air-conditioning unit and volume of condensates to be removed does not affect the operational sound level of the pump.
- New mounting bracket specifically designed to reduce vibration transmission to the wall / panel or pipework
- Easy to install
- Compact design
- New mounting bracket : allows the pump to be wall mounted or hung from ceilings and pipework
- Plug-in power cord to make maintenance and replacement hassle free
- Energy saving
- Improved performance and high flow rate reduce operation time and energy
- Kit Includes:
- Piston pump
- Anti-vibration mounting bracket
- Plug in power cable with 2 safety switch wires (5ft - 1,5 m)
- 6 tie wraps, 1/10" x 4" (2.5 x 100mm)
- Detection unit SI2958, with (5 ft - 1.5m) cable
- Detection unit installation kit: rubber elbow 90° Øint. 19/32" x 2"3/8 (Øint. 15 x L 60mm), Vent tube Øint. 5/32" x L 2"15/16 (Øint. 4 x L 75 mm), mounting rail, adhesive
-
TECHNICAL SPECIFICATION
- Max. flow rate 5.0 gph (19 l/h)
- Max. suction head 10 ft (3 m)
- Max. discharge head 33ft (10 m); flow rate= 1gph (4l/h)
- Max pressure 46 ft (14 m); flow rate = 0 gph (0l/h)
- Sound level at 1m according to EN ISO 3744 (Measured at LNE lab, pump operating with water, out of application) 20 dBA
- Sound level in application at 1m: (Measured in Sauermann acoustic lab, pump operating with water) ≤ 27 dBA
- Mains supply 120V ~ 60 Hz - 14 W (SI3000SIUS11) 230 V ~ 50/60 Hz - 14 W (SI3000SIUS23)
- Insulation class (double insulation)
- Detection levels On=5/8” Off=7/16’’ Alarm=3/4’’ (ON: 16mm, OFF: 11mm, AL: 19mm)
- Safety switch NC 8A resistive - 250 V
- Thermal protection (overheating) 194°F (90°C) auto-reset
- Intermittent operation cycle 30%: 3s ON – 7s OFF
- Protection IP20
- Safety standards UL/CSA certified by Intertek
- RoHS directive Compliant
- DEEE directive Compliant
Dimensions:- Pump Unit: 2 5/8"L x 1 3/4" W x 2 3/8"H
- Detection Unit: 2 1/4"L x 1 1/2"W x 1` 1/2"H
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
