Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit

Sku:
AMANA-GT01HKIT2
Backorder

Estimated shipping is 6 - 8 weeks

$455.00

This package includes the GT01H GenericTenna, the DS01G DigiStat Thermostat and the DD01E DigiDoor Occupancy Sensor.

Amana GT01H GenericTenna RF Transceiver/Router Antenna for Amana VTAC Air Conditioners.

By way of an encrypted 2.4 GHz signal using the 802.15 Zigbee standard, the GenericTenna is able to communicate with any Amana VTAC. The GenericTenna mounts inside the VTAC, is powered through the VTAC and requires no batteries. This item is required for wireless DigiSuite RF devices to communicate with the Amana VTAC. Using the DigiSmart Wireless Suite of products from Amana may reduce energy consumption up to 35%.
  • Mounts inside PTAC
  • No Batteries necessary
  • Uses encrypted 2.4 GHZ signal

 

Amana DS01G DigiStat Thermostat with Motion PIR for Amana DigiSmart PTAC and VTAC Air Conditioners.

Designed to work with the DD01E Occupancy Sensor, the DS01G is equipped with a Passive Infrared Motion Sensor. The Digistat Thermostat can control your Amana PTAC from anywhere in the room.
  • Equipped with Motion PIR (Passive Infrared Motion Sensor) technology to work in conjunction with the DD01E Occupancy Sensor
  • The DigiSmart™ Remote Thermostat Can Control The Amana® DigiSmart PTAC or VTAC From Anywhere In The Room.
  • Powered By 4 AAA Batteries Included In The Kit.
  • The Thermostat Communicates With The unit Through A Two-way Encrypted Radio Frequency (RF) Signal.
  • Settings Can Be Changed At Either The Unit Or The Thermostat. Changes Are Automatically Relayed To The Other Device Within Moments.
  • The Antenna Communicates To The Amana® DigiSmart Suite Of Devices Via An Encrypted 2.4 Ghz Signal Using The 802.15.4 Standard.

 

Amana DD01E DigiDoor Occupancy Based Energy Management Sensor for Amana PTAC and VTAC Air Conditioners.

A Combination door switch and room motion sensor.
  • Powered by 2 AAA batteries included in the kit
  • When room is unoccupied, sensor automatically activates the temperature set-back for the PTAC
  • Setback function, which is part of the DigiSmart standard Energy Management System (EMS) in the PTAC control board can be set up in 100,000 set-back combinations for maximum energy savings.
  • Communicates to the Amana DigiSmart suite of devices by way of an encrypted 2.4 Ghz signal using the 802.15.4 standard.
FREE SHIPPING ON ALL ORDERS!
Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit
  • Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit
  • Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit
  • Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit
  • Amana GT01H-DS01G-DD01E GenericTenna RF Antenna, DigiDoor Occupancy Sensor and DigiStat Thermostat Kit
  • +1

Product Overview

This package includes the GT01H GenericTenna, the DS01G DigiStat Thermostat and the DD01E DigiDoor Occupancy Sensor.

Amana GT01H GenericTenna RF Transceiver/Router Antenna for Amana VTAC Air Conditioners.

By way of an encrypted 2.4 GHz signal using the 802.15 Zigbee standard, the GenericTenna is able to communicate with any Amana VTAC. The GenericTenna mounts inside the VTAC, is powered through the VTAC and requires no batteries. This item is required for wireless DigiSuite RF devices to communicate with the Amana VTAC. Using the DigiSmart Wireless Suite of products from Amana may reduce energy consumption up to 35%.
  • Mounts inside PTAC
  • No Batteries necessary
  • Uses encrypted 2.4 GHZ signal

 

Amana DS01G DigiStat Thermostat with Motion PIR for Amana DigiSmart PTAC and VTAC Air Conditioners.

Designed to work with the DD01E Occupancy Sensor, the DS01G is equipped with a Passive Infrared Motion Sensor. The Digistat Thermostat can control your Amana PTAC from anywhere in the room.
  • Equipped with Motion PIR (Passive Infrared Motion Sensor) technology to work in conjunction with the DD01E Occupancy Sensor
  • The DigiSmart™ Remote Thermostat Can Control The Amana® DigiSmart PTAC or VTAC From Anywhere In The Room.
  • Powered By 4 AAA Batteries Included In The Kit.
  • The Thermostat Communicates With The unit Through A Two-way Encrypted Radio Frequency (RF) Signal.
  • Settings Can Be Changed At Either The Unit Or The Thermostat. Changes Are Automatically Relayed To The Other Device Within Moments.
  • The Antenna Communicates To The Amana® DigiSmart Suite Of Devices Via An Encrypted 2.4 Ghz Signal Using The 802.15.4 Standard.

 

Amana DD01E DigiDoor Occupancy Based Energy Management Sensor for Amana PTAC and VTAC Air Conditioners.

A Combination door switch and room motion sensor.
  • Powered by 2 AAA batteries included in the kit
  • When room is unoccupied, sensor automatically activates the temperature set-back for the PTAC
  • Setback function, which is part of the DigiSmart standard Energy Management System (EMS) in the PTAC control board can be set up in 100,000 set-back combinations for maximum energy savings.
  • Communicates to the Amana DigiSmart suite of devices by way of an encrypted 2.4 Ghz signal using the 802.15.4 standard.

Tech Specs

Control Type:
Digital
Touchscreen:
No
Programmable:
No
Use with Heat Pump:
Yes
Use with Gas/Oil:
No
Use with Electric Furnace:
No
Backlit Display:
Yes
Auto Changeover:
No
WiFi Ready:
No
Product Type:
Thermostats and Controls
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov