AquaMotion AMH2K-7 Recirculation Pump Kit with Timer for Hot Water Tank Installation

AquaMotion AMH2K-7 Recirculation Pump Kit with Timer for 3 Pipe Hot Water Tank Installation

Sku:

AQUAMOTION-AMH2K7

Out Stock,

In Stock, Ships Next Business Day

$429.00

The AquaMotion AMH2K-7 is designed to deliver hot water quickly at all points of use between the hot water tank and the dedicated return line. The built-in pump timer gives the homeowner the ability to have the system operate at the times when hot water is needed. The Aquastat is a temperature sensor that will tell the pump to run when the water at the fixture starts to drop below 85°F. It will run until it reaches 105°F and then it will shut off. Built-in timers are preferred over ON-DEMAND because you would not need to manually activate your pump.

The AMH2K-7 is for use with a standard hot water heater with a dedicated return line. This is a 3-pipe system that includes a hot water line, a cold water line, and a dedicated return. This system creates a loop from the water heater to the faucet and back again. The unused hot water is drawn back through this loop by the pump, so when you turn on your hot water faucets, you get hot water quickly. Water is not left in the pipes to get cold, and you waste less water because you don’t have to wait.

Water savings can be as great as 12,000 – 15,000 gallons per year with 4-5 taps in a home. As many homeowners know, you can turn on the faucet and wait for the water to heat up for a very long time - sometimes more than 2 or 3 minutes. That waiting time is wasting energy and countless gallons of water!

All of the moving parts of the AquaMotion AMH2K-7 recirculator are housed in a "Green Eco Cartridge Design". It is the only field serviceable and replaceable cartridge available. With this design, simply remove the rotor assembly, flush the cartridge with water and reinstall it. Simple, cost effective, patented technology!

Requirements for using the AMH2K-7 include a min./max. water pressure of 20 PSI / 125 PSI with a maximum ambient water temperature of 104°F. Good for up to 250 feet of pipe length. The AMH2K-7 includes everything you need:

AM7-SUVA1LT1 Pump with Built-in timer
10 Ft line cord / 3 prong plug
3/8" x 1/2" x 3/8" Compression Tee
(2) 3/4" NPT Male Union Tail Pieces
(2) Union Nuts and Gaskets
Installation and Operating Instructions

Here is a quick reference to confirm that the AMH2K-7 hot water recirculator will work for your needs:

You DO have a Dedicated Return Line
You have a Standard Storage Tank Hot Water Heater (NOT a Tankless)

If you are looking for the same pump but ON-DEMAND hot water and no timer, take a look at the AquaMotion AMH2K-7N.

AquaMotion - Designed, Built and Tested in the US. AquaMotion pumps are covered by a 3 year limited warranty. Please email us at info@AquaMotionHVAC.com and we will work with you to troubleshoot any problems you may have with your AquaMotion Pump.