Product Overview
The Bromic On/Off Switch with wireless remote is compatible with all Bromic gas and electric heaters. It makes controlling your outdoor environment so easy. The remote has up to a 100 ft range. It can be hand-held or mounted on the wall for easy access without fear of losing! The switch gives you the freedom of controlling various heaters with a single remote. It can be used to control two gas heaters independently or up to four gas heaters (in groups of two). For electric heaters independent control of two single-element (2kW or 3kW per unit) or a single twin-element (4kW or 6kW) heater can be controlled with the BH3130010-1 on/off switch with remote.
Programmable functions include ON/OFF, impulsive and timer control settings up to 8 hr-59 min-59 sec. Operating conditions include a temperature range of -4° to 122°F and can be used with 110/240VAC, 28A (31A max.), single phase power supply. The On/Off Controller is mounted and wired to your heater(s). It is 7"h x 5.5"w x 3.3"d and must be installed on a surface which cannot be damaged by high temperatures. Additionally, connection cable glands must be downward and protected against accidental impacts.
Below is an example of the installation:
The remote is a 4-channel remote transmitter. It can be easily carried around or wall mounted either with double stick adhesive or permanently mounted with screws.
Heater options for installation include:
| ELECTRIC | GAS |
| 1 - 6000 Watt Heater | 1 Heater per output channel (Up to 2 Total) |
| 1 - 4000 Watt Heater | 2 Heaters per output channel (up to 4 Total) |
| 2 - 3400 Watt Heaters | |
| 2 - 3000 Watt Heaters | |
| 2 - 2000 Watt Heaters |
