Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace

Sku:
EMPIRE-DV25SG
Natural Gas - In Stock, Ships Next Business Day, Propane - Usually Leaves Warehouse in 2 - 3 Business Days
$1,729.00
Empire's Direct-Vent units are ideal where existing flues or chimneys cannot be used. The Empire's DV25 installs on an outside wall and vents out the back. A direct vent system is efficient too. It uses outside air to support combustion, while inside air is warmed as it recirculates inside the sealed combustion chamber.
 
Heating large areas is convenient and economical with this Empire wall heater. The cabinet is a durable, textured, beige color with venting in the front and top to circulate the air in all directions. The DV25SG includes a basic reed switch wall thermostat (TMV - shown in photos above).
 
Standard accessories included with heater are the standard vent cap, flue outlet and air intake for venting - all required for installation.
  • Heats during a power outage (If optional blower is installed, blower will not operate during power outage.)
  • Less costly versus electric heat
  • Optional automatic blower available (DRB-1 Electricity required, sold separately)
  • An upgraded wall thermostat (TRW) is available, sold separately
  • Cost-efficient installation -- no chimney needed
  • This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes
  • 64 - 69% AFUE Efficiency Rating
This item is available in both Liquid Propane (DV-25-SG-LP) and Natural Gas (DV-25-SG-NAT). 
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs. Empire Comfort System warranty covers parts only, no labor.
FREE SHIPPING ON ALL ORDERS!
Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • Empire Comfort Systems DV-25-SG 25,000 BTU Direct-Vent Wall Furnace
  • +2

Product Overview

Empire's Direct-Vent units are ideal where existing flues or chimneys cannot be used. The Empire's DV25 installs on an outside wall and vents out the back. A direct vent system is efficient too. It uses outside air to support combustion, while inside air is warmed as it recirculates inside the sealed combustion chamber.
 
Heating large areas is convenient and economical with this Empire wall heater. The cabinet is a durable, textured, beige color with venting in the front and top to circulate the air in all directions. The DV25SG includes a basic reed switch wall thermostat (TMV - shown in photos above).
 
Standard accessories included with heater are the standard vent cap, flue outlet and air intake for venting - all required for installation.
  • Heats during a power outage (If optional blower is installed, blower will not operate during power outage.)
  • Less costly versus electric heat
  • Optional automatic blower available (DRB-1 Electricity required, sold separately)
  • An upgraded wall thermostat (TRW) is available, sold separately
  • Cost-efficient installation -- no chimney needed
  • This appliance may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes
  • 64 - 69% AFUE Efficiency Rating
This item is available in both Liquid Propane (DV-25-SG-LP) and Natural Gas (DV-25-SG-NAT). 
 
A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs. Empire Comfort System warranty covers parts only, no labor.

Tech Specs

General Features

Installation Type:
Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Vent Kit Included
Tilt Switch:
NA

Performance Data

Heating BTUs:
25000
Heating BTUs (Output):
NA

Venting

Type of Venting:
Direct Vent
Air Inlet Tube (in.):
6"
Flue Outlet Tube (in.):
4"

System Data

Flame Type:
NA
Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Wall Thermostat Required (NOT INCLUDED)

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
4.0" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
5.0" w.c. (NG) / 11.0" w.c. (LP)
Inet Gas Pressure (Max.):
10.5" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
48
Bottom to Floor (in.):
4
To Side Wall (in.):
6

Weights and Dimensions

Width (in.):
37
Depth (in.):
11.5
Height (in.):
27.75
Net Weight (lbs.):
98
Certifications:
CSA
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov