Product Overview
When heating large areas, the SR30W quickly heats a room with 30,000 BTUs at the touch of a button. This unit features controls on the top of the unit that are easy to use. A push button igniter lights the pilot, eliminating the need for matches. The heater will also function in the event of a power outage since gas heater do not require electricity unless a blower is installed.
The SR-30W has been updated to white and has manual controls and settings of 10,000, 20,000 or 30,000 BTUs.
Vent-Free Products are intended to be used as a supplemental or secondary heat source. If window condensation problems are common in your home, installing a vent-free heater may not be a good option for you.
- Oxygen-Depletion Sensor shuts off the unit if there is not enough available fresh air
- Updated White Finish
- Durable, scratch-resistant finish
- Gas heats cleanly and efficiently and is more cost efficient versus electric heat
- 99.9% AFUE Efficiency
Available in Natural Gas SR-30WNAT and Liquid Propane SR-30WLP
This gas heater may be installed in an aftermarket manufactured (mobile) home, where not prohibited by state or local codes. A licensed gas technician is required for installation of this product. Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
PHOTO SHOWS HEATER MOUNTED ON OPTIONAL FLOOR STAND.
Vent-Free Products Cannot Be Shipped To The State Of California.
Tech Specs
General Features
System Data
Gas Requirements
Clearances
Weights and Dimensions
Electrical Requirements
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
