Friedrich FPHW091A 9000 BTU, 18.5 SEER2 Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V

Sku:
FRIEDRICH-FPHW091A
In Stock, Ships Next Business Day
$1,249.00 $999.00

Friedrich FPHW091A 9000 BTU single zone mini split system includes both the FPHSW09A1B wall unit and the FPHSR09A1A outdoor compressor. Inverter Technology is only the beginning of the standard money-saving features included with Friedrich Floating Air Pro Series ductless mini split systems. This technology offers the consumer the ability to run their system much more efficiently, and reduce energy costs all while cooling the space and reaching the desired set temperature more quickly. To help keep the room at a comfortable level, longer, the compressor runs at a lower speed instead of shutting off completely. This helps the system to maintain the set temperature, alleviating the need for the system to start up again from a completely shut down state.

One of the newest features of the Floating Air Pro Series is the FastPro Technology. FastPro Technology makes installation and maintenance a much easier, less time consuming task. FastPro gives your HVAC technician easy access to the entire indoor unit, including piping, wire terminal, the fan and fan components. The front panel of your wall unit can be propped open with sliding bolts to keep the cover up and out of the way. If more room is needed to work, there is a slide bar than can be pushed out for a wider space. This makes installation of the refrigerant lines and wiring a much more manageable, less time consuming task for your HVAC technician. Interior parts such as the return air filters and the entire blower wheel assembly are easily removed for cleaning or servicing (away from your room of installation) and re-installed quickly. Servicing should always be left for the HVAC Technicians. FastPro also gives the technician easy access to the coils for maintenance and cleaning.

The Energy Star FPHW091A mini split is a 115 Volt, cooling with heat pump system. It features high efficiency ratings including a 18.5 SEER2 and 12.8 EER. The built-in low ambient cooling capabilities will cool your space when outside temperatures are as low as 5°F. The 9500 BTU heat pump will work hard to keep you warm. The integrated drain pan will turn on when the temperature drops below 28°F and turns off when the temperature increases to 30°F. The temperature is judged by the ODU Temperature sensor signal. As expected the rated heating capacity does reduce as the temperatures fall. This system will give you 5,000 BTUs at 17°F but with its low ambient heating capacity, will provide heat even with temperatures down to -4°F. If you are need to cool a server room or other equipment year round, this unit's low ambient cooling features make it a great choice.

Friedrich's Pro Series Floating Air wall unit feature built-in WiFi and access to FriedrichGo App for wireless control as well as Google Assistant and Alexa voice commands. The wall unit offers optimized air flow with 4-way air swing that send the conditioned air to all corners of your space. The 9,000 BTUs will cool a room that is about 450 sq. ft. Factors such as windows, doors, computers and ceiling height must be factored in when calculating the BTUs you need for your specific installation requirements. 

Features of the Standard Wall unit include:

  • Built-In WiFi
  • Create customizable, 7-day schedules (available with WiFi and optional wall control only)
  • Fast Pro® design for the fastest access for maintenance of any wall-mounted ductless system
  • Auto Clean indoor coil
  • Cooling/Heating/Fan/Auto Mode
  • Surge Cool/Heat
  • Natural air flow
  • Ultra quiet operation
  • Sleep mode
  • Auto restart
  • 24-hour on/off timer
  • Hidden display (only visible during operation)

In contrast to central air conditioning, which cools your entire house whenever the system turns on, a mini split cools only the space you want cooled, when you want it cooled! When you install a mini split system, you get all the benefits of individualized room comfort control without losing your view or having to remove and store your unit in the off season. Installation of a mini split system is permanent and non-obtrusive. Installing a Friedrich Mini Split is a relatively easy undertaking. Mini split systems do not require duct work and your system should be up and running in a few hours*.

The outdoor unit includes DiamonBlue Advanced Corrosion Protection to protect the outdoor coil from harsh environments as well as rust and corrosion. Each Friedrich mini split is pre-charged with R410A refrigerant for 25 feet of line. Additionally, the line sets can be as long as 50 feet between the compressor and the indoor unit with a 33 foot height difference. Line sets are sold separately.

*This unit must be installed by a qualified licensed HVAC technician.

The Friedrich Floating Air Series ductless mini split system comes with a 7 year (extended to 10 with product registration) parts and 10 year compressor Manufacturer's warranty. The option of adding a 5 year labor warranty to your coverage is also available (separately) at the time of purchase.

FREE SHIPPING ON ALL ORDERS!
Friedrich FPHW091A 9000 BTU Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V
  • Friedrich FPHW091A 9000 BTU Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V
  • Friedrich FPHW091A 9000 BTU, 18.5 SEER2 Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V
  • Friedrich FPHW091A 9000 BTU, 18.5 SEER2 Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V
  • Friedrich FPHW091A 9000 BTU, 18.5 SEER2 Floating Air Pro Series Single Zone Mini Split with Built-In WiFi - Heat and Cool - Energy Star - 115V
  • +1
Product Videos

Product Overview

Friedrich FPHW091A 9000 BTU single zone mini split system includes both the FPHSW09A1B wall unit and the FPHSR09A1A outdoor compressor. Inverter Technology is only the beginning of the standard money-saving features included with Friedrich Floating Air Pro Series ductless mini split systems. This technology offers the consumer the ability to run their system much more efficiently, and reduce energy costs all while cooling the space and reaching the desired set temperature more quickly. To help keep the room at a comfortable level, longer, the compressor runs at a lower speed instead of shutting off completely. This helps the system to maintain the set temperature, alleviating the need for the system to start up again from a completely shut down state.

One of the newest features of the Floating Air Pro Series is the FastPro Technology. FastPro Technology makes installation and maintenance a much easier, less time consuming task. FastPro gives your HVAC technician easy access to the entire indoor unit, including piping, wire terminal, the fan and fan components. The front panel of your wall unit can be propped open with sliding bolts to keep the cover up and out of the way. If more room is needed to work, there is a slide bar than can be pushed out for a wider space. This makes installation of the refrigerant lines and wiring a much more manageable, less time consuming task for your HVAC technician. Interior parts such as the return air filters and the entire blower wheel assembly are easily removed for cleaning or servicing (away from your room of installation) and re-installed quickly. Servicing should always be left for the HVAC Technicians. FastPro also gives the technician easy access to the coils for maintenance and cleaning.

The Energy Star FPHW091A mini split is a 115 Volt, cooling with heat pump system. It features high efficiency ratings including a 18.5 SEER2 and 12.8 EER. The built-in low ambient cooling capabilities will cool your space when outside temperatures are as low as 5°F. The 9500 BTU heat pump will work hard to keep you warm. The integrated drain pan will turn on when the temperature drops below 28°F and turns off when the temperature increases to 30°F. The temperature is judged by the ODU Temperature sensor signal. As expected the rated heating capacity does reduce as the temperatures fall. This system will give you 5,000 BTUs at 17°F but with its low ambient heating capacity, will provide heat even with temperatures down to -4°F. If you are need to cool a server room or other equipment year round, this unit's low ambient cooling features make it a great choice.

Friedrich's Pro Series Floating Air wall unit feature built-in WiFi and access to FriedrichGo App for wireless control as well as Google Assistant and Alexa voice commands. The wall unit offers optimized air flow with 4-way air swing that send the conditioned air to all corners of your space. The 9,000 BTUs will cool a room that is about 450 sq. ft. Factors such as windows, doors, computers and ceiling height must be factored in when calculating the BTUs you need for your specific installation requirements. 

Features of the Standard Wall unit include:

  • Built-In WiFi
  • Create customizable, 7-day schedules (available with WiFi and optional wall control only)
  • Fast Pro® design for the fastest access for maintenance of any wall-mounted ductless system
  • Auto Clean indoor coil
  • Cooling/Heating/Fan/Auto Mode
  • Surge Cool/Heat
  • Natural air flow
  • Ultra quiet operation
  • Sleep mode
  • Auto restart
  • 24-hour on/off timer
  • Hidden display (only visible during operation)

In contrast to central air conditioning, which cools your entire house whenever the system turns on, a mini split cools only the space you want cooled, when you want it cooled! When you install a mini split system, you get all the benefits of individualized room comfort control without losing your view or having to remove and store your unit in the off season. Installation of a mini split system is permanent and non-obtrusive. Installing a Friedrich Mini Split is a relatively easy undertaking. Mini split systems do not require duct work and your system should be up and running in a few hours*.

The outdoor unit includes DiamonBlue Advanced Corrosion Protection to protect the outdoor coil from harsh environments as well as rust and corrosion. Each Friedrich mini split is pre-charged with R410A refrigerant for 25 feet of line. Additionally, the line sets can be as long as 50 feet between the compressor and the indoor unit with a 33 foot height difference. Line sets are sold separately.

*This unit must be installed by a qualified licensed HVAC technician.

The Friedrich Floating Air Series ductless mini split system comes with a 7 year (extended to 10 with product registration) parts and 10 year compressor Manufacturer's warranty. The option of adding a 5 year labor warranty to your coverage is also available (separately) at the time of purchase.

Tech Specs

General Features

Bundle Includes:
FRIEDRICH-FPHSW09A1B, FRIEDRICH-FPHSR09A1A
Refrigerant:
R410A
Compressor:
Inverter
Energy Star:
Yes
Dehumidification (pts/hr):
1.9
CFMs:
247 / 323 / 382 / 424 (Q / L / M / H)
Fan Speeds:
4
Min. Indoor Noise Level (dBA):
26 / 29 / 32 / 39 (Q / L / M / H)
Outdoor Unit Noise Level (dBA):
53
Includes Heat Pump:
Yes

Performance Data

Cooling BTUs:
9000
Cooling BTU Output Range:
3600 - 10000
EER:
12.8
SEER2:
18.5
Heat Pump BTUs:
9500
Heating BTU Output Range:
3600 - 10500
COP:
3.56
HSPF2:
8.5

Features

Control Type:
Hand Held Remote
Connectivity:
Built-In WiFi
Wired Thermostat Optional:
Optional
Inverter Technology:
Yes

Piping / Line Set Requirements

Line Set Liquid Line:
1/4"
Line Set Suction Line:
3/8"
Pipe Length (No Addl Refr Req):
25
Max. Pipe Length (ft.):
50
Max. Height Difference (Indoor / Outdoor) (ft.):
33

Operating Range

Ambient Temperature Range - Cooling:
5°F - 115°F
Ambient Temperature Range - Heating:
-4°F - 75°F
Min. Outdoor Temp for Heat °F:
-4

Weights and Dimensions

Indoor Unit

Width (in.):
33.875
Depth (in.):
8.5
Height (in.):
11.125
Weight (lbs.):
20

Outdoor Unit

Width (in.):
28.125
Depth (in.):
9.5
Height (in.):
19
Weight (lbs.):
65
Certifications:
ETL, ETLc

Electrical Requirements

Voltage:
110-120V
Amps:
13.5
Circuit Breaker Size (Amps):
20
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

Standard Warranty Information

  • Parts: 7 Years Limited Warranty if unit is not registered
  • Compressor: 10 Years Limited Warranty if unit is not registered
  • Labor: None

The warranty for this unit is for parts only, and does not cover labor or diagnostic services.

EXTENDED Warranty Information

  • Parts: 10 Years Limited Warranty if unit is properly registered online.
  • Labor: None

The warranty for this unit is for parts only, and does not cover labor or diagnostic services.

Warranty coverage is provided when the equipment is professionally installed and is subject to proof of installation.