Product Overview
Friedrich FSHW183A 18,000 BTU single zone mini split system includes both the FAHFW18A3A wall unit and the FSHSR18B3B outdoor compressor. Inverter Technology is only the beginning of the standard money-saving features included with Friedrich Floating Air Select Series ductless mini split systems. This technology offers the consumer the ability to run their system much more efficiently, and reduce energy costs all while cooling the space and reaching the desired set temperature more quickly. To help keep the room at a comfortable level, longer, the compressor runs at a lower speed instead of shutting off completely. This helps the system to maintain the set temperature, alleviating the need for the system to start up again from a completely shut down state.
The FSHW183A mini split is a 208/230 Volt, cooling with heat pump system. It features high efficiency ratings including a 21.0 SEER2 and 11.95 EER2. The built-in low ambient cooling capabilities will cool your space when outside temperatures are as low as 5°F. The 18,000 BTU heat pump will work hard to keep you warm. As expected the rated heating capacity does reduce as the temperatures fall. This system cannot be used as a primary heating source for most of the country, but it will give you 14,800 BTUs at 17°F. With its low ambient heating capacity, it will continue to provide heat (8,200 BTUs) even with temperatures down to -4°F. If you are need to cool a server room or other equipment year round, this unit's low ambient cooling features make it a great choice.
Friedrich's Select Series Floating Air wall units are Smart Home Ready with built-in WiFi and access to FriedrichGo App for wireless control as well as Google Assistant and Alexa voice commands. With the FriedrichGo App you can also create customizable, 7-day schedules for your total comfort. The wall unit offers optimized air flow with 4-way air swing that send the conditioned air to all corners of your space. The 18,000 BTUs will cool a room that is about 800 sq. ft. Factors such as windows, doors, computers and ceiling height must be factored in when calculating the BTUs you need for your specific installation requirements.
Features of the Standard Wall unit include:
- Built-In WiFi
- Auto/Cool/Dry/Fan Only/Heat Modes
- Turbo Mode - maximum performance to quickly bring the room to set temperature
- Quiet operation
- 4 Fan speeds
- Remote
- Continuous Air Sweep up & down
- Auto-shut flaps when unit is off
- Auto restart after power failure
- 24-hour timer and sleep timer
- Brief display of set or room temperature
In contrast to central air conditioning, which cools your entire house whenever the system turns on, a mini split cools only the space you want cooled, when you want it cooled! When you install a mini split system, you get all the benefits of individualized room comfort control without losing your view or having to remove and store your unit in the off season. Installation of a mini split system is permanent and non-obtrusive. Installing a Friedrich Mini Split is a relatively easy undertaking. Mini split systems do not require duct work and your system should be up and running in a few hours*.
The outdoor unit is pre-charged with R32 refrigerant for 25 feet of line. Additionally, the line sets can be as long as 100 feet between the compressor and the indoor unit with a 50 foot height difference. Line sets are sold separately.
*This unit must be installed by a qualified licensed HVAC technician.
The Friedrich Floating Air Select Series ductless mini split system comes with a 7 year (extended to 10 with product registration) parts and 10 year compressor Manufacturer's warranty. The option of adding a 5 year labor warranty to your coverage is also available (separately) at the time of purchase.
Tech Specs
General Features
Performance Data
Features
Piping / Line Set Requirements
Operating Range
Weights and Dimensions
Indoor Unit
Outdoor Unit
Electrical Requirements
WARNING!
Product Warranty
Standard Warranty Information
- Parts: 7 Years Limited Warranty if unit is not registered
- Compressor: 10 Years Limited Warranty if unit is not registered
- Labor: None
The warranty for this unit is for parts only, and does not cover labor or diagnostic services.
EXTENDED Warranty Information
- Parts: 10 Years Limited Warranty if unit is properly registered online.
- Labor: None
The warranty for this unit is for parts only, and does not cover labor or diagnostic services.
Warranty coverage is provided when the equipment is professionally installed and is subject to proof of installation.