Friedrich VHA24K75RTQ Vert-I-Pak 24000 BTU VTAC with Heat Pump - 11.9 SEER2 - 7.5 kW Electric Heat - 230V

Sku:
FRIEDRICH-VHA24K75RTQ
In Stock, Ships Next Business Day
$3,539.00
Give your property a more homelike appearance with a Vert-I-Pak Vertical Packaged Air System - a simpler way to condition multiple rooms. Vert-I-Pak fits neatly into a typical mechanical closet, so you can create indoor living spaces that are more versatile. Since the system fits into a closet with an outside wall, guests and tenants will enjoy a quieter, visually appealing living space, without giving up individual, in-room temperature control or access to windows. Even quieter operating sound levels may be achieved by insulating the closet. In keeping with quieter operational sound levels, the Friedrich VTAC units fit into a wall plenum and a gasket seals it to the chassis plus extra thick rubber grommets help to reduce vibration noise.
 
The VHA24K models are 208/230 Volt and feature a large, 52" tall, chassis while still keeping the same 23" x 23" footprint as the shorter units. It includes 21,800 BTUs cooling capacity and 18,500 BTUs reverse cycle heat pump operation. In addition to meeting to new AHRI standards, Friedrich verticals are rated with the new SEER2, EER2 and HSPF2 ratings as well. The new Friedrich VHA24K**RTQ series of VTACs all feature 10.6 EER2, 11.9 SEER2 and 6.3 HSPF2 ratings. Additionally, with its new base pan heater the Friedrich RTQ Series offer Ultimate Low-Ambient Operation. The Friedrich VTAC units offer heat pump operation down to 17°F at which point the back-up electric heater will kick on. 
 
With a vertical packaged air system you get several installation possibilities:
  • A Simpler Way to Condition Multiple Rooms - A single unit may be ducted for flexible zone cooling in multiple rooms.
  • Installs as easily as a PTAC - All units are pre-wired, charged and piped, so only electrical hook up is needed to be up and running.
  • As a packaged unit, this air conditioner comes pre-charged with refrigerant, so there is no additional sealed system work required.
  • A Better System Inside and Out - Ideal for extended stay properties, suites, assisted living facilities and student housing.
  • Lower MCA and MOCP with concurrent compressor and resistance heat operation during defrost
  • A Friedrich vertical system is also compatible with wired and wireless energy management systems.
The Friedrich Vert-I-Pak Systems are available with your choice of electric back-up heater size. The VHA24K75RTQ includes a 7.5 Kw electric heater and requires a 45 Amp circuit. Other options of electric heat include a 2.5 Kw (20 Amp circuit) (VHA24K25RTQ), 3.4 Kw (25 Amp circuit) (VHA24K34RTQ), 5.0 Kw (30 Amp circuit) (VHA24K50RTQ) and 10.0 Kw (60 Amp circuit) (VHA24K10RTQ).
 
Features of the Vert-I-Pak include:
  • R-410A refrigerant
  • Compact and lightweight
  • Unique free-floating chassis
  • Easy to connect right, left or rear drain connection
  • Corrosion resistant interior
  • Easy to install front, left or right hand into closet on an outside wall
  • Remote thermostat ready; 24V transformer
  • Standard safety power disconnect
  • Electronic control panel on unit for easy diagnostics and servicing
  • Compatible with single stage thermostats (WRT2, RT7 and RT7P), wired and wireless energy management systems 
  • Return air grilles and (VPRG4) are available separately
  • Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
  • Eliminates the clutter of split systems and the need for multiple PTACs
  • A Drain Pan (VPDP2) is required for NEW INSTALLATIONS of this unit.
 208V230V
Electric Heat Data:    
Watts: 6135  7500
BTUs: 20900 25600
Heating Amps: 30.3 33.4
Minimum Circuit Ampacity: 41.8 41.8
Branch Circuit Fuse (Amps): 45 45
Basic Heater Size: 7.5 kW 7.5 kW
 
Product Specifications are subject to change.
FREE SHIPPING ON ALL ORDERS!
Friedrich VHA24K75RTQ Vert-I-Pak 24000 BTU VTAC with Heat Pump - 11.9 SEER2 - 7.5 kW Electric Heat - Drain Pan Included - 230V
  • Friedrich VHA24K75RTQ Vert-I-Pak 24000 BTU VTAC with Heat Pump - 11.9 SEER2 - 7.5 kW Electric Heat - Drain Pan Included - 230V
  • Friedrich VHA24K75RTQ Vert-I-Pak 24000 BTU VTAC with Heat Pump - 11.9 SEER2 - 7.5 kW Electric Heat - 230V
Product Video

Product Overview

Give your property a more homelike appearance with a Vert-I-Pak Vertical Packaged Air System - a simpler way to condition multiple rooms. Vert-I-Pak fits neatly into a typical mechanical closet, so you can create indoor living spaces that are more versatile. Since the system fits into a closet with an outside wall, guests and tenants will enjoy a quieter, visually appealing living space, without giving up individual, in-room temperature control or access to windows. Even quieter operating sound levels may be achieved by insulating the closet. In keeping with quieter operational sound levels, the Friedrich VTAC units fit into a wall plenum and a gasket seals it to the chassis plus extra thick rubber grommets help to reduce vibration noise.
 
The VHA24K models are 208/230 Volt and feature a large, 52" tall, chassis while still keeping the same 23" x 23" footprint as the shorter units. It includes 21,800 BTUs cooling capacity and 18,500 BTUs reverse cycle heat pump operation. In addition to meeting to new AHRI standards, Friedrich verticals are rated with the new SEER2, EER2 and HSPF2 ratings as well. The new Friedrich VHA24K**RTQ series of VTACs all feature 10.6 EER2, 11.9 SEER2 and 6.3 HSPF2 ratings. Additionally, with its new base pan heater the Friedrich RTQ Series offer Ultimate Low-Ambient Operation. The Friedrich VTAC units offer heat pump operation down to 17°F at which point the back-up electric heater will kick on. 
 
With a vertical packaged air system you get several installation possibilities:
  • A Simpler Way to Condition Multiple Rooms - A single unit may be ducted for flexible zone cooling in multiple rooms.
  • Installs as easily as a PTAC - All units are pre-wired, charged and piped, so only electrical hook up is needed to be up and running.
  • As a packaged unit, this air conditioner comes pre-charged with refrigerant, so there is no additional sealed system work required.
  • A Better System Inside and Out - Ideal for extended stay properties, suites, assisted living facilities and student housing.
  • Lower MCA and MOCP with concurrent compressor and resistance heat operation during defrost
  • A Friedrich vertical system is also compatible with wired and wireless energy management systems.
The Friedrich Vert-I-Pak Systems are available with your choice of electric back-up heater size. The VHA24K75RTQ includes a 7.5 Kw electric heater and requires a 45 Amp circuit. Other options of electric heat include a 2.5 Kw (20 Amp circuit) (VHA24K25RTQ), 3.4 Kw (25 Amp circuit) (VHA24K34RTQ), 5.0 Kw (30 Amp circuit) (VHA24K50RTQ) and 10.0 Kw (60 Amp circuit) (VHA24K10RTQ).
 
Features of the Vert-I-Pak include:
  • R-410A refrigerant
  • Compact and lightweight
  • Unique free-floating chassis
  • Easy to connect right, left or rear drain connection
  • Corrosion resistant interior
  • Easy to install front, left or right hand into closet on an outside wall
  • Remote thermostat ready; 24V transformer
  • Standard safety power disconnect
  • Electronic control panel on unit for easy diagnostics and servicing
  • Compatible with single stage thermostats (WRT2, RT7 and RT7P), wired and wireless energy management systems 
  • Return air grilles and (VPRG4) are available separately
  • Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
  • Eliminates the clutter of split systems and the need for multiple PTACs
  • A Drain Pan (VPDP2) is required for NEW INSTALLATIONS of this unit.
 208V230V
Electric Heat Data:    
Watts: 6135  7500
BTUs: 20900 25600
Heating Amps: 30.3 33.4
Minimum Circuit Ampacity: 41.8 41.8
Branch Circuit Fuse (Amps): 45 45
Basic Heater Size: 7.5 kW 7.5 kW
 
Product Specifications are subject to change.

Tech Specs

General Features

Refrigerant Type:
R410A
Compressor:
Standard
Energy Star:
No
Dehumidification (pts/hr):
NA
CFMs (@ 0.1 ESP):
600 / 700 (L / H)
Includes Heat Mode:
Yes
Heat Type:
Heat Pump with Back-Up Electric
Electric Heat kW:
7.5

Performance @230 Volt

Cooling BTUs (@230V):
21800
EER2 (@230V):
10.6
SEER2 (@230V):
11.9
Cooling Amps (@230V):
10.7
Cooling Watts (@230V):
2045
Heat Pump BTUs (@230V):
TBD
COP (@230V):
3.1
HSPF2 (@230V):
6.3
Heat Pump Heating Amps (@230V):
TBD
Heat Pump Heating Watts (@230V):
TBD

Features

Vent Location:
Ducted Into Room
Make-Up Air:
No
Energy Saver Mode:
No
Fan Speeds:
High or Low
Control Type:
Wall Thermostat Required (NOT INCLUDED)
Connectivity:
Not WiFi Compatible
Fresh Air Intake:
No

Weights and Dimensions

Overall Depth (in.):
23
Overall Width (in.):
23
Overall Height (in.):
52
Weight (lbs.):
225

Electrical Requirements

Voltage:
208-230V
Circuit Breaker Size (Amps):
45

Electric Heat Performance

Electric Heat Performance @208V and 230V:
See Description
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

  • Parts and Labor Warranty - 1 year
  • Sealed System Warranty - 5 years