Product Overview
FOR COMMERCIAL USE ONLY - 265 VOLTS
Give your property a homelike appearance with a Vert-I-Pak Vertical Packaged Air System - a simpler way to condition multiple rooms. Vert-I-Pak fits neatly into a typical mechanical closet, so you can create indoor living spaces that are more versatile. Since the system fits into a closet with an outside wall, guests and tenants will enjoy a quieter, visually appealing living space, without giving up individual, in-room temperature control or access to windows. Even quieter operating sound levels may be achieved by insulating the closet. Additionally, to help further eliminate vibration noise, the unit slides into the wall plenum and is sealed with a gasket. The unit also includes extra thick grommets, mounted on the base.
The VHA24R models are 265 volt. These units are for commercial use only and feature 22,600 BTUs of cooling comfort and 19,500 BTUs of heat from the heat pump. The new line of Friedrich VTACs boasts R-32 low-GWP refrigerant. R32 is up to 12% more efficient than R410A, resulting in lower Global Warming Potential (GWP). The lower the GWP, the better for the environment. In addition to meeting to new AHRI standards, Friedrich verticals are rated with the new SEER2, EER2 and HSPF2 ratings as well. The new Friedrich VHA24R**RCQ models of VTACs all feature 10.6 EER2, 11.9 SEER2, 6.7 HSPF2 ratings. Additionally, with its new base pan heater the Friedrich RCQ Series offer Ultimate Low-Ambient Operation. The Friedrich VTAC units offer heat pump operation down to 10°F at which point the back-up electric heater will kick on.
The newly designed Friedrich VTACs do require a rectangular duct transition to 10" as well as a new platform which requires field sourced 2x4's for support. With a vertical packaged air system you get several installation possibilities:
- A Simpler Way to Condition Multiple Rooms - A single unit may be ducted for flexible zone cooling in multiple rooms.
- Installs as easily as a PTAC - All units are pre-wired, charged and piped, so only electrical hook up is needed to be up and running.
- As a packaged unit, this air conditioner comes pre-charged with refrigerant, so there is no additional sealed system work required.
- A Better System Inside and Out - Ideal for extended stay properties, suites, assisted living facilities and student housing.
- Lower MCA and MOCP with concurrent compressor and resistance heat operation during defrost
Features of the Vert-I-Pak include:
- R-32 refrigerant
- Compact and lightweight
- Unique free-floating chassis
- 10” crimped and beaded duct-collar ready to attach flex-duct
- Easy to connect right, left or rear drain connection
- Corrosion resistant interior
- Easy to install front, left or right hand into closet on an outside wall
- Remote thermostat ready; 24V transformer
- Standard safety power disconnect
- Electronic control panel on unit for easy diagnostics and servicing
- Architectural louver, single stage thermostats (WRT2, RT7 and RT7P) and return air grilles and (VPRG4) are available separately
- Architectural louvers are required and available in standard extruded aluminum (VPAL2) or as a custom color option requiring special handling (VPSC2)
- Eliminates the clutter of split systems and the need for multiple PTACs
- No refrigerant lines running from floor to floor
| 265V | |
|---|---|
| Electric Heat Data: | |
| Watts: | 10000 |
| BTUs: | 34100 |
| Heating Amps: | 44.3 |
| Minimum Circuit Ampacity: | 55.4 |
| Branch Circuit Fuse (Amps): | 60 |
| Basic Heater Size: | 10.0 kW |
Product Specifications are subject to change.
The VHA24R10RCQ replaces the VHA24R10RTQ
Tech Specs
General Features
Performance @265 Volt
Features
Weights and Dimensions
Electrical Requirements
Electric Heat Performance
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
