null

GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant

Sku:
GE-AVVS12DCXWA
Usually Leaves Warehouse in 3 - 5 Business Days
$2,299.00
For your convenience, we are including a Universal Direct Connect Power Supply with this unit. Choose either a 15 amp, 20 amp or 30 amp hardwire kit.
 
The GE Zoneline Vertical Packaged Terminal Heat Pump has excellent COP (Coefficient of Performance) ratings. This is the measurement of the efficiency of the heat pump output compared to electric resistance heat. In addition to comparing heat pump output versus electric heat, this number also allows a direct comparison to other heat pumps with the same range capacity. At  47°, the AVVS12DCXWA features a COP of 3.5 with a heating BTU range of 4,500 - 13,000. The AVVS12DCXWA Ultimate V11 Series also meets new AHRI Standards and are rated with the new EER2, SEER2 and HSPF2 ratings. The AVVS12DCXWA features 12.0 EER2, 17.0 SEER2 and 8.1 HSPF2 ratings. This unit is also WiFi ready with the GE's Smart HQ WiFi.
 
GE Zoneline Ultimate V11 Series uses R454B refrigerant. R454B features a Global Warming Potential (GWP) of 467 - the most environmentally friendly refrigerant available. The larger the GWP, the more that specific gas warms the Earth. Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out. 
 
GWP Refrigerant Comparison
 

Similar to central heating systems, the GE Zoneline Vertical Heat Pump incorporates the use of a reverse cycle defrost system. This allows the heat pump to operate at lower outdoor temperatures without frost accumulation on the outdoor coil. The new AVVS12DCXWA Ultimate V11 Series Heat Pump will operate to 0°F. This helps provide owners with a cost efficient method of heating. Additionally, the AVVS series features Corrosion Protection standard, so no need to worry how close you are to the water, your unit will be protected against corrosion. The new AVVS12DCXWA has a variable speed compressor with Perfect Control Technology. The variable speed inverter gives you all the comfort you need, boasting a range of 5,200 - 16,200 BTUs of cooling power. With a range like that, this unit will work in just about any size room in your property.
 
The Ultimate V11 Series also has Dehumidification Sentinel, for powerful moisture removal. This feature automatically turns on to maintain your desired humidity levels. This helps to alleviate the need to manually control you humidity levels, just set it and forget it.  For example you can set your humidity level for 40%. Once the humidity levels exceed this set point, the unit will automatically start dehumidifying. Because it only turns on if your humidity level is too high, not only will your rooms maintains a comfortable level, you will potentially save on energy costs. You and your property will benefit knowing your rooms will not suffer from excessive humidity and dampness.
  
With its variable speed technology, the GE AVVS12DCXWA Ultimate V11 Series Heat Pump Zoneline Vertical Air Conditioner (VTAC) can be used to replace several models including 9,000, 12,000 and 18,000 BTU units. It features a heat pump and offers a rated cooling capacity of 12,500 BTUs (@95°F outdoor temp.) with a  cooling range capacity of 5,200 - 16,200 BTUs. It also offers a rated heating capacity of 11,200 BTUs (@47°F) with a heat pump capacity range of 4,500 - 13,000 BTUs. It features an inverter true variable speed compressor for added energy savings.
 
At Total Home Supply, we also give you your choice of power supply. The power amperage you choose is directly related to the amount of electric heat you get. Universal power supply kits are available in 15 Amp; 2.45 kW electric heat, 20 Amp; 3.45 kW electric heat and 30 Amp; 5.0 kW electric heat options. The AVVS Ultimate V11 Series is also equipped with 2 fan speeds. Featured on this unit is the Quick Heat Recovery System. The heat pump incorporates a two stage heat/one stage cooling thermostat that utilizes the resistance heat to bring the room temperature to within 2° of the thermostat set point before initiating the heat pump operation. This helps bring the room up to temperature quickly and allowing for warmer air to be discharged when the heat pump kicks in.

A GE Vertical Air Conditioner (VTAC or Vertical PTAC) helps you optimize floor space because the unit is concealed in a closet with an outside wall rather than out in the open. With hidden installation, the room becomes more aesthetically appealing, giving it more of an at-home appearance, with no limitations on furniture placement or window treatment installation.

Although the VTAC is still a through-the-wall installation, its footprint is approximately 24" x  24" x 32" and it is hidden inside an enclosure which looks like a closet, versus a standard PTAC unit which is installed in the room taking up over 42" of floor space.
 
The Ultimate V11 Series has uses a wall mounted thermostat. It has two-way communicating thermostat capabilities and also works with Y1/Y2 staged low voltage control thermostats. Its top air discharge can be ducted into one or more rooms - perfect for suite set-ups. The design of the new AVVS Ultimate V11 models includes a one-piece design, which fully integrates with the wall plenum and aligns for a tight seal. This design eliminates the need for building a customized platform on the construction site. Additionally, it uses a Quick-Install Plenum that easily installs from inside the building without the need for exterior building access (caulking required).
 
REQUIRED COMPONENTS FOR NEW INSTALLATION (each sold separately):
  • Drain Platform (included) (RAVDPLAT)
  • Plenum or Transition Plenum (RAVWPT9 or RAVTRANS2, 3, 4*)
  • Exterior Grille (RAVAL3)
  • Return Air Panel / Access Grille (RAVRG4 / RAVRG2)
  • Remote Thermostat (RAK150VF2 {standard 8-wire} or RAK190V {two-way, 4 wire})
  • Power Connection Kit - Supplies power to the unit  as well as resistance heat (15 Amp; 2.45 kW - RAK315D, 20 Amp; 3.45 kW - RAK320D, 30 Amp; 5.0 kW - RAK330D). Your choice is included with your purchase.
Electric Heat Data (Power Cord Amp): RAK315D RAK320D RAK330D
Basic Heater Size: 2.4 Kw 3.4 Kw 5.0 Kw
BTUs (@208V): 6838 9629 13952
Heater Watts (@208V): 2004 2822 4089
Heater Amps (@208V): 9.6 13.6 19.7
       
BTUs (@230V) 8360 11770 17060
Watts (@230V): 2450 3450 5000
Heating Amps (@230V): 10.7 15.0 21.7
Circuit Breaker: 15 20 30
 
Standard features specific to the UltimateV11 VTACs include:
  1. Chassis Design with Perfect Fit to Insta-Platform™ - One-piece design fully integrates with the wall plenum and aligns for a tight seal
  2. Self-Contained Drainage System - Easy installation and simple chassis removal while leaving plumbing intact
  3. Fast-Connect Plumbing - Enables platform build and rough plumbing completed in only minutes
  4. Quick-Install Plenum (sold separately) - Plenum is easily installed from the interior of building, without the need for exterior access
  5. Self-Aligning, Lock In Place Platform System - Perfect fit and mistake proof when the chassis is placed on the platform
  6. Onboard Electronic Error Diagnostics - Electronic controls give clear and fast diagnostics data and fault codes, for quick and easy notifications
  7. Reverse Cycle Defrost - Exclusive technology increases efficiency, enabling the unit to run in heat pump mode longer
  8. Anti-Corrosion Design - Exclusive rust-proof basepan and bulkhead provide another level of corrosion protection
  9. Ultra-Quiet - Delivers quiet cooling power with a smooth sound for a good night’s sleep
  10. SmartHQ WiFi - Built-in WiFi SmartHQ management-ready (subscription required)
Other standard features include:
  • Energy efficient with 12.0 EER2, 17.0 SEER2 and 8.1 HSPF2 ratings
  • Central Desk Control Compatibility
  • Corrosion Treated
  • Auto Power Recovery
  • Weather Protected Electrical Components
  • Auto Compressor Random Restart
  • Automatic Emergency Heat
  • Automatic Indoor Frost Control
  • Freeze Sentinel
  • Heat Sentinel
  • Heat Pump with Resistance Heat Backup
  • Quick Heat Recovery
  • Thermostat Quick Disconnect
  • Boost Heat

*When replacing a previous model GE Vertical Units with the new AVVS Series vertical air conditioner, one of three transition plenums (RAVTRANS2, RAVTRANS3, RAVTRANS4) must be used.

SPECS ARE SUBJECT TO CHANGE

FREE SHIPPING ON ALL ORDERS!
GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • GE AVVS12DCXWA 12000 BTU Class Zoneline Ultimate V11 Inverter VTAC with Heat Pump - Power Connection Kit Included - WiFi - 208/230 Volt - R454B Refrigerant
  • +3
Product Video

Product Overview

For your convenience, we are including a Universal Direct Connect Power Supply with this unit. Choose either a 15 amp, 20 amp or 30 amp hardwire kit.
 
The GE Zoneline Vertical Packaged Terminal Heat Pump has excellent COP (Coefficient of Performance) ratings. This is the measurement of the efficiency of the heat pump output compared to electric resistance heat. In addition to comparing heat pump output versus electric heat, this number also allows a direct comparison to other heat pumps with the same range capacity. At  47°, the AVVS12DCXWA features a COP of 3.5 with a heating BTU range of 4,500 - 13,000. The AVVS12DCXWA Ultimate V11 Series also meets new AHRI Standards and are rated with the new EER2, SEER2 and HSPF2 ratings. The AVVS12DCXWA features 12.0 EER2, 17.0 SEER2 and 8.1 HSPF2 ratings. This unit is also WiFi ready with the GE's Smart HQ WiFi.
 
GE Zoneline Ultimate V11 Series uses R454B refrigerant. R454B features a Global Warming Potential (GWP) of 467 - the most environmentally friendly refrigerant available. The larger the GWP, the more that specific gas warms the Earth. Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out. 
 
GWP Refrigerant Comparison
 

Similar to central heating systems, the GE Zoneline Vertical Heat Pump incorporates the use of a reverse cycle defrost system. This allows the heat pump to operate at lower outdoor temperatures without frost accumulation on the outdoor coil. The new AVVS12DCXWA Ultimate V11 Series Heat Pump will operate to 0°F. This helps provide owners with a cost efficient method of heating. Additionally, the AVVS series features Corrosion Protection standard, so no need to worry how close you are to the water, your unit will be protected against corrosion. The new AVVS12DCXWA has a variable speed compressor with Perfect Control Technology. The variable speed inverter gives you all the comfort you need, boasting a range of 5,200 - 16,200 BTUs of cooling power. With a range like that, this unit will work in just about any size room in your property.
 
The Ultimate V11 Series also has Dehumidification Sentinel, for powerful moisture removal. This feature automatically turns on to maintain your desired humidity levels. This helps to alleviate the need to manually control you humidity levels, just set it and forget it.  For example you can set your humidity level for 40%. Once the humidity levels exceed this set point, the unit will automatically start dehumidifying. Because it only turns on if your humidity level is too high, not only will your rooms maintains a comfortable level, you will potentially save on energy costs. You and your property will benefit knowing your rooms will not suffer from excessive humidity and dampness.
  
With its variable speed technology, the GE AVVS12DCXWA Ultimate V11 Series Heat Pump Zoneline Vertical Air Conditioner (VTAC) can be used to replace several models including 9,000, 12,000 and 18,000 BTU units. It features a heat pump and offers a rated cooling capacity of 12,500 BTUs (@95°F outdoor temp.) with a  cooling range capacity of 5,200 - 16,200 BTUs. It also offers a rated heating capacity of 11,200 BTUs (@47°F) with a heat pump capacity range of 4,500 - 13,000 BTUs. It features an inverter true variable speed compressor for added energy savings.
 
At Total Home Supply, we also give you your choice of power supply. The power amperage you choose is directly related to the amount of electric heat you get. Universal power supply kits are available in 15 Amp; 2.45 kW electric heat, 20 Amp; 3.45 kW electric heat and 30 Amp; 5.0 kW electric heat options. The AVVS Ultimate V11 Series is also equipped with 2 fan speeds. Featured on this unit is the Quick Heat Recovery System. The heat pump incorporates a two stage heat/one stage cooling thermostat that utilizes the resistance heat to bring the room temperature to within 2° of the thermostat set point before initiating the heat pump operation. This helps bring the room up to temperature quickly and allowing for warmer air to be discharged when the heat pump kicks in.

A GE Vertical Air Conditioner (VTAC or Vertical PTAC) helps you optimize floor space because the unit is concealed in a closet with an outside wall rather than out in the open. With hidden installation, the room becomes more aesthetically appealing, giving it more of an at-home appearance, with no limitations on furniture placement or window treatment installation.

Although the VTAC is still a through-the-wall installation, its footprint is approximately 24" x  24" x 32" and it is hidden inside an enclosure which looks like a closet, versus a standard PTAC unit which is installed in the room taking up over 42" of floor space.
 
The Ultimate V11 Series has uses a wall mounted thermostat. It has two-way communicating thermostat capabilities and also works with Y1/Y2 staged low voltage control thermostats. Its top air discharge can be ducted into one or more rooms - perfect for suite set-ups. The design of the new AVVS Ultimate V11 models includes a one-piece design, which fully integrates with the wall plenum and aligns for a tight seal. This design eliminates the need for building a customized platform on the construction site. Additionally, it uses a Quick-Install Plenum that easily installs from inside the building without the need for exterior building access (caulking required).
 
REQUIRED COMPONENTS FOR NEW INSTALLATION (each sold separately):
  • Drain Platform (included) (RAVDPLAT)
  • Plenum or Transition Plenum (RAVWPT9 or RAVTRANS2, 3, 4*)
  • Exterior Grille (RAVAL3)
  • Return Air Panel / Access Grille (RAVRG4 / RAVRG2)
  • Remote Thermostat (RAK150VF2 {standard 8-wire} or RAK190V {two-way, 4 wire})
  • Power Connection Kit - Supplies power to the unit  as well as resistance heat (15 Amp; 2.45 kW - RAK315D, 20 Amp; 3.45 kW - RAK320D, 30 Amp; 5.0 kW - RAK330D). Your choice is included with your purchase.
Electric Heat Data (Power Cord Amp): RAK315D RAK320D RAK330D
Basic Heater Size: 2.4 Kw 3.4 Kw 5.0 Kw
BTUs (@208V): 6838 9629 13952
Heater Watts (@208V): 2004 2822 4089
Heater Amps (@208V): 9.6 13.6 19.7
       
BTUs (@230V) 8360 11770 17060
Watts (@230V): 2450 3450 5000
Heating Amps (@230V): 10.7 15.0 21.7
Circuit Breaker: 15 20 30
 
Standard features specific to the UltimateV11 VTACs include:
  1. Chassis Design with Perfect Fit to Insta-Platform™ - One-piece design fully integrates with the wall plenum and aligns for a tight seal
  2. Self-Contained Drainage System - Easy installation and simple chassis removal while leaving plumbing intact
  3. Fast-Connect Plumbing - Enables platform build and rough plumbing completed in only minutes
  4. Quick-Install Plenum (sold separately) - Plenum is easily installed from the interior of building, without the need for exterior access
  5. Self-Aligning, Lock In Place Platform System - Perfect fit and mistake proof when the chassis is placed on the platform
  6. Onboard Electronic Error Diagnostics - Electronic controls give clear and fast diagnostics data and fault codes, for quick and easy notifications
  7. Reverse Cycle Defrost - Exclusive technology increases efficiency, enabling the unit to run in heat pump mode longer
  8. Anti-Corrosion Design - Exclusive rust-proof basepan and bulkhead provide another level of corrosion protection
  9. Ultra-Quiet - Delivers quiet cooling power with a smooth sound for a good night’s sleep
  10. SmartHQ WiFi - Built-in WiFi SmartHQ management-ready (subscription required)
Other standard features include:
  • Energy efficient with 12.0 EER2, 17.0 SEER2 and 8.1 HSPF2 ratings
  • Central Desk Control Compatibility
  • Corrosion Treated
  • Auto Power Recovery
  • Weather Protected Electrical Components
  • Auto Compressor Random Restart
  • Automatic Emergency Heat
  • Automatic Indoor Frost Control
  • Freeze Sentinel
  • Heat Sentinel
  • Heat Pump with Resistance Heat Backup
  • Quick Heat Recovery
  • Thermostat Quick Disconnect
  • Boost Heat

*When replacing a previous model GE Vertical Units with the new AVVS Series vertical air conditioner, one of three transition plenums (RAVTRANS2, RAVTRANS3, RAVTRANS4) must be used.

SPECS ARE SUBJECT TO CHANGE

Tech Specs

General Features

Refrigerant Type:
R454B
Compressor:
Inverter
Energy Star:
No
Dehumidification (pts/hr):
3.1
CFMs (@ 0.1 ESP):
380 / 465 (L / H)
Includes Heat Mode:
Yes
Heat Type:
Heat Pump with Back-Up Electric
Electric Heat kW:
Power Supply Dependent

Performance @230 Volt

Cooling BTUs (@230V):
11200
EER2 (@230V):
12.0
SEER2 (@230V):
17.0
Cooling Amps (@230V):
4.9
Cooling Watts (@230V):
1050
Heat Pump BTUs (@230V):
11200
COP (@230V):
3.5
HSPF2 (@230V):
8.1
Heat Pump Heating Amps (@230V:
NA
Heat Pump Heating Watts (@230V):
NA

Features

Vent Location:
Ducted into room
Make-Up Air:
No
Energy Saver Mode:
No
Fan Speeds:
3
Control Type:
Wall Thermostat Required (NOT INCLUDED)
Connectivity:
Built-In WiFi
Fresh Air Intake:
No

Weights and Dimensions

Overall Depth (in.):
24.125
Overall Width (in.):
23.625
Overall Height (in.):
31.875
Weight (lbs.):
125

Electrical Requirements

Voltage:
208-230V
Circuit Breaker Size (Amps):
Power Supply Dependent (15/20/30)

Electric Heat Performance

Electric Heat Performance @208V and 230V:
See Description (Power Supply Dependent)
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

Parts and Labor Warranty: 1 Year Limited

Parts Only Warranty: Additional 4 Year Limited Warranty

Sealed Refrigerating System Warranty: 5 Years Limited