GE RAK149F2A Non-Programmable Digital Thermostat with High/Low Fan Speed for PTACs & VTACs

Sku:
GE-RAK149F2A
Usually Leaves Warehouse in 3 - 5 Business Days
$89.00
This 24V AC digital remote wall thermostat works with PTAC and VTAC units with 2 fan speeds. It can be used with Single Stage Cooling/Single Stage Heat (Resistance Heat) and 2-Stage Heating/1-Stage cooling systems. 2-Stage heat includes heat pump and resistance heat. It requires a 7-wire hook-up for 2 stage heat systems.
 
The remote wall thermostat has an easy to read display and three easy to use slide switches: Mode (Cool/Off/Heat), Fan (Auto Settings/High/Low). Easy to use arrow buttons to increase or decrease the temperature setting. This is a non-programmable thermostat. It is 3-3/4"h x 6"w x 1"d and includes the wire harness, wire caps and screws for installation.
 
Electrical rating:
  • 24 VAC (20–30 VAC)
  • 1.5 amp maximum per terminal
  • 2.5 amp maximum total load
Operating temperature range:
  • 32°F–105°F (0°C–41°C)
Temperature set range:
  • 60°F–85°F (15°C–29°C)
  • Accuracy: ± 1°F (± 0.5°C)
System configurations:
  • Factory Setting: 2-stage heat (heat pump/resistance heat), 1-stage cool, 2-speed fan
  • Alternate Setting: 1-stage heat (resistance heat), 1-stage cool, 2-speed fan
Terminations:
  • R, C, W, Y, GH, GL, B
Wiring:
  • Maximum wiring length is 66ft (20 meters) for AWG18
  • Maximum wiring length is 60ft (18 meters) for AWG20

This item replaces the RAK148F2 thermostats.
FREE SHIPPING ON ALL ORDERS!
GE RAK149F2A Non-Programmable Digital Thermostat with High/Low Fan Speed for PTACs & VTACs

Product Overview

This 24V AC digital remote wall thermostat works with PTAC and VTAC units with 2 fan speeds. It can be used with Single Stage Cooling/Single Stage Heat (Resistance Heat) and 2-Stage Heating/1-Stage cooling systems. 2-Stage heat includes heat pump and resistance heat. It requires a 7-wire hook-up for 2 stage heat systems.
 
The remote wall thermostat has an easy to read display and three easy to use slide switches: Mode (Cool/Off/Heat), Fan (Auto Settings/High/Low). Easy to use arrow buttons to increase or decrease the temperature setting. This is a non-programmable thermostat. It is 3-3/4"h x 6"w x 1"d and includes the wire harness, wire caps and screws for installation.
 
Electrical rating:
  • 24 VAC (20–30 VAC)
  • 1.5 amp maximum per terminal
  • 2.5 amp maximum total load
Operating temperature range:
  • 32°F–105°F (0°C–41°C)
Temperature set range:
  • 60°F–85°F (15°C–29°C)
  • Accuracy: ± 1°F (± 0.5°C)
System configurations:
  • Factory Setting: 2-stage heat (heat pump/resistance heat), 1-stage cool, 2-speed fan
  • Alternate Setting: 1-stage heat (resistance heat), 1-stage cool, 2-speed fan
Terminations:
  • R, C, W, Y, GH, GL, B
Wiring:
  • Maximum wiring length is 66ft (20 meters) for AWG18
  • Maximum wiring length is 60ft (18 meters) for AWG20

This item replaces the RAK148F2 thermostats.

Tech Specs

Control Type:
Digital
Type:
24V
Stages of Heat:
2
Stages of Cool:
1
Touchscreen:
No
Programmable:
No
Use with Heat Pump:
Yes
Use with Gas/Oil:
No
Use with Electric Furnace:
No
Backlit Display:
Yes
Auto Changeover:
No
WiFi Ready:
No
Product Type:
Thermostats and Controls
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov