Product Overview
This 24V AC programmable digital remote wall thermostat works with PTAC and VTAC units. It can be used with Single Stage Cooling/Single Stage Heat (Resistance Heat) and 2-Stage Heating/1-Stage cooling systems. 2-Stage heat includes heat pump and resistance heat. It requires a 6-wire hook-up.
It is programmable for 7-day and 5+2 day programs. The 7 day allows for a customizable schedule for each day of the week, while the 5+2 lets you program weekdays separately from weekend days. The remote wall thermostat has an easy to read display and easy to use side switches for Mode (Cool/Off/Heat) and Fan (Auto Settings/High/Low). Easy to use arrow buttons to increase or decrease the temperature setting as well as separate buttons for setting your programming needs.
It is 3-3/4"h x 6"w x 1"d and includes a wire harness, wire caps and screws for installing.
Electrical rating:
Electrical rating:
- 24 VAC (18–30 VAC)
- 1 amp maximum per terminal
- 4 amp maximum total load
Operating temperature range:
- 40°F–99°F (4°C–37°C)
Temperature set range:
- 60°F–85°F (15°C–29°C)
Accuracy:
- ± 1°F (± 0.5°C)
System configurations:
- Factory Setting: 2-stage heat (heat pump/resistance heat), 1-stage cool, 1-speed fan
- Alternate Setting: 1-stage heat (resistance heat), 1-stage cool, 1-speed fan
Terminations:
- R, C, W, Y, G, B
Wiring:
- Maximum wiring length is 66ft (20 meters) for AWG18
- Maximum wiring length is 60ft (18 meters) for AWG20
This item replaces the RAK149P2 thermostats.
Technical Specifications are subject to change.
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov