Heatstar HSVFRD10 10000 BTU VF Infrared Manual Heater Fuel Choice

Heatstar HSVFRD10 10000 BTU Vent Free Infrared/Radiant Heater with Manual Control and Choice of Fuel

Sku:

HEATSTAR-HSVFRD10

Out Stock,

Usually Leaves Warehouse in 2 - 3 Business Days

$223.59

HeatStar by Enerco offers gas powered, vent free heating options for your warmth and comfort. The HSVFRD10 10,000 BTU Radiant heater is available in your choice of Natural Gas or Liquid Propane. It is a great option for supplemental heat in areas that are about 250 square feet. Radiant heaters are also known as infrared heaters. This type of heater heats the objects in the room. Similar to how the sun heats, radiant heaters use electromagnetic radiation. This unit offers multiple burner tiles to heat up your space. With a Radiant Heater, there is no waiting to warm up - almost as if you are standing in front of a fire! Radiant heaters are often best used in uninsulated spaces such as unfinished basements or garages. The closer you are to an infrared heater, the warmer you will be. Because infrared or radiant heaters heat the objects in a room keep flammable items such as furniture, clothing and fabric at a reasonable distance from the heater.

Vent Free Radiant heaters are extremely economical, operating at 99.9% efficiency and the HeatStar heaters feature a built-in low oxygen shut-off sensor for safety.

This heater includes both the wall mount bracket as well as base feet. This gives you installation options best suited to your needs. One of the perks of this 10000 BTU Radiant heater is the option to install it into a bedroom! For wall mounting, it is suggested that it be mounted 36 inches from the floor for accessibility. However, clearance to the floor when using the feet is a minimum of 3 inches (to the top of carpet). Clearance above the unit should be a minimum of 36 inches, while clearance on either side should be at least 10 inches.

This heater includes a convenient Piezo ignition built right into the rotation of the control knob for easy ignition. The burner will cycle on and off based on the set temperature. Because it is gas powered, it will keep you warm, without electricity, during power outages. The blower fan will not operate during a power outage, but the heater will still generate heat to keep you warm and comfortable.

The 10,000 BTU radiant heater is available in Liquid Propane (HSVFRD10LP) and Natural Gas (HSVFRD10NG).

Vent-Free Products Cannot Be Shipped To The State Of California.

Product Overview
Tech Specs
Manuals and Guides

Product Overview

Vent Free Radiant heaters are extremely economical, operating at 99.9% efficiency and the HeatStar heaters feature a built-in low oxygen shut-off sensor for safety.

The 10,000 BTU radiant heater is available in Liquid Propane (HSVFRD10LP) and Natural Gas (HSVFRD10NG).

Vent-Free Products Cannot Be Shipped To The State Of California.

Tech Specs

General Features

Installation Type:

Floor or Wall Mount

Fuel Type:

Choice NG / LP

Installation Kit:

Wall and Floor Stand Kits Included

Type of Venting:

Vent Free

Tilt Switch:

System Data

Heating BTUs:

10000

CFMs:

Blower:

Not Available

Flame Type:

Infrared / Radiant

Ignition Type:

Piezo

Control Type:

Manual

Gas Requirements

Gas Connection Size (in.):

1/2"

Manifold Pressure (in.):

4.5" w.c.

Inlet Gas Pressure (Min.):

7.0" w.c. (NG) / 11.0" w.c. (LP)

Inlet Gas Pressure (Max.):

14.0" w.c. (NG) / 14.0" w.c. (LP)

Clearances

Top to Ceiling (in.):

36"

Bottom to Floor (in.):

To Side Wall (in.):

10"

Weights and Dimensions

Width (in.):

15.75

Depth (in.):

7.5

Height (in.):

Net Weight (lbs.):

Certifications:

CSA, ANSI

Electrical Requirements

Voltage:

110-120V