Product Overview
The King OKB Radiant Heaters are a perfect solution for indoor areas where spot heating is needed. These heaters are for areas where a great amount of heat is not required. These heaters also do not require high mounting heights. Minimum clearance for this type of heater is 72" from the floor and 24" from the ceiling and 24" on either end - and from walls. Multiple units can be installed with a minimum of 36" between units. The units are easily mounted from the ceiling with chain and the 2 included eye bolts. The heaters can also be installed with rods or flush mounted to a non-combustible surface.
It is a radiant heater which heats surfaces through electromagnetic waves. Rather than heating the air, radiant heat is absorbed by objects in the room, heating the space similar to the way objects absorb the heat of the sun.
Additional benefits of installing an OKB radiant heater are:
- For Lower Ceiling Heights
- Heats Objects Not the Surrounding Air
- Radiant Heat
- Single Incoloy® Element
- Extruded Aluminum Housing
- 60˚ Spread
- Rated For Indoor Or Outdoor Use
- Tilting Swivel Bracket
- Multiple Mounting Options Available
Installation possibilities for this type of heater include churches, garages and even indoor pool areas. Coverage area for each heater unit is dependent on the height with which it is mounted. Mounting Heights and Coverage areas are the same regardless of your choice of 208V or 480V.
|
|
Coverage | ||
| Mounting Height |
Width | Length | Sq. Ft. |
|
8' |
5.8' | 9.2' | 52.9 |
| 9' | 6.9' | 10.2' | 70.4 |
| 10' | 8.1' | 11.2' | 90.2 |
| 11' | 9.2' | 12.2' | 112.2 |
| 12' | 10.4' | 13.2' | 136.6 |
| 13' | 11.5' | 14.2' | 163.3 |
These heaters are special order and cannot be cancelled.
Tech Specs
General Features
Weights and Dimensions
Electrical Requirements
WARNING!
