Product Overview
The Majestic HEAT-ZONE-GAS Kit can be used with the PH-MR Passive Heat Kit for Passive heating in your primary space with either the PH-SIDETRIM or PH-FRTTRIM and zone heating to another space. If you are not planning on using the Passive Heat Kit, the Non-Passive Heat Adapter (HZMR-ADP, sold separately) is required. Heat Zone adapter features a fan, 20 feet of 6-inch round duct, a vent, wall adapter, Heat Zone adapter, and on/off control.
The Heat Zone Kit connects the fireplace with a duct run and can be vented to the other side of your room, a separate room or even upstairs. The included register vent can be used as a ceiling, wall or floor register. Only one Heat-Zone-Gas kit can be installed and used in conjunction with the Passive Heat System. Installation of the HZMR-ADP kit is not required, if using the Passive Heat Kit.
Heat-Zone Kit includes fan, 20' of 6" round duct, vent, wall adapter & on/off control. Wire Plug Assembly 26D0619 required if controlling w/RC400 remote. Used in IFT units with ACM & not a GFK fan. Compatible for up to 2 HEAT-ZONE-GAS kits. See manual.
The Heat Zone Kit includes everything pictured above plus 2 gear clamps, 2 mounting brackets, 10 screws, a wire strain relief and a ground screw. Installation of this kit MUST be performed by a qualified service technician.
Tech Specs
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
