Product Overview
Mr. Cool is proud to announce the NEW Indoor Wall Unit for DIY Multi-Zone Mini Split System!
This is the indoor unit only. It must be used with a compatible multi zone outdoor condenser.
Mr. Cool DIY-09-HP-WMAH-230C25 is a 9,000 BTU indoor wall unit for use with the new line of Mr. Cool DIY Multi-Zone outdoor compressors only. The 9,000 BTU unit can be used with any Mr. Cool Multi Zone system. The indoor unit includes 25 ft. of DIY Pro Cable. Each indoor unit includes a remote control as well as a SmartHVAC controller for WiFi accessibility. The system can work either on your phone or computer and works with both Amazon Alexa as well as Google Assistant. Mr. Cool 9,000 BTU unit offers comfort for a space up to 375 sq. ft.
Some other features include:
- Follow Me Function - Keep your remote nearby - based on the location of the remote, MRCOOL DIY will track the air temperature around you to ensure you get the maximum comfort
- Dehumidifying operation - not only will it keep you cool, it will remove the humidity level, letting you set the temperature a little higher and still be comfortable
- Auto Restart - Automatically restarts after a power failure
- Lover Position Memory - The horizontal louver will automatically move to the same position it was set to the last time your unit was turned on
- Sleep Mode - Offers you 24 hour comfort even when you sleep. It is easy to program, saving you money and letting you rest easy
As with other Mr. Cool DIY systems, the DIY Multi-Zone indoor units are easy to install and do not require an HVAC installer. On the wall installation is easy and connecting the line sets from the indoor unit to the outdoor unit require only a small hole through the walls and then out to the condenser. Mr. Cool Pre-Charged Quick Disconnect Line Sets are pre-charged and no vacuuming is required. The line sets are kink resistant and leak proof. They are the only line sets to be used with the Mr. Cool DIY multi-zone and single zone* systems. They are sized for 1/4 x 1/2 connections for use with the 9,000, 12,000 and 18,000 BTU indoor units. The 24,000 BTU unit uses a different line set with 3/8" x 5/8" connections and can only be used with the Quad Zone System.
Your Mr. Cool indoor wall unit comes with 25 feet of DIY Pro Cable. This length of wire is appropriate for a single line set (25 ft length). If you are planning on longer line set lengths, you will need to add a coupler to join the line sets and additional Pro-Cable. MrCool DIY Couplers will be packaged with Pro-Cable for an unbroken run from the indoor unit to the outdoor unit. Simply disconnect the 25 foot length of cable and replace it with the new cable included with your coupler. The Pro-Cable features crimped connectors as well as protective conduit covering for long lasting use. It connects from the outdoor unit to the indoor unit.
Tech Specs
Performance Data
System Data
Features
Piping / Line Set Requirements
Weights and Dimensions
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
