null

MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi Smart Controller - 115 Volt - Energy Star - R454B Refrigerant - 25 Ft. Line Set

Sku:
MRCOOL-DIY12HPWM115D25O
Usually Leaves Warehouse in 5 - 7 Business Days
$1,929.00

The only do it yourself (DIY), easy to install mini split air conditioner available. 

Energy Star Qualified System with Wireless-Enabled Smart Controller INCLUDED!

Mr. Cool Do It Yourself (DIY) Single Zone Mini Split System is offered in sizes to fit all of your installation needs. The 5th Generation Systems are available in BTUs from 9,000 for smaller room (up to 400 sq. ft.) installations up to 36,000 BTUs (up to 1550 sq. ft.) for those large spaces! All single zone systems, with the exception of the 36,000 BTU system, are Energy Star Certified, meeting strict energy efficiency ratings. Many of these systems also meet even more stringent qualifications for Energy Star Certification in Cold Climates. Cold Climate certification tests units down to 5° to ensure heat all winter. For you, as a consumer, this means energy cost savings overall, while still maintaining the comfort level you want! While the 36,000 BTU system is not Energy Star Certified, it still offers great efficiency ratings.  
 
The Mr. Cool 5th Generation DIY single zone systems now use R454B refrigerant for lower Global Warming Potential (GWP). While some manufacturers have chose the R32 refrigerant, Mr. Cool condensers chose R454B. R454B features a Global Warming Potential (GWP) of 467 - the most environmentally friendly refrigerant available. The larger the GWP, the more that specific gas warms the Earth. Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out. 
 
GWP Refrigerant Comparison
 
With 12,000 BTUs, the DIY-12 system will cool a space that is about 550 sq. ft. This system uses 115 Volt electricity so it is easy to incorporate into almost any home or office. It is Energy Star Certified, boasting high ratings including 12.5 EER2, 23.5 SEER2 and 10.2 HSPF2-4 ratings. HSPF2-4 covers climates in Zone 4 including Florida, Texas and California where the average winter temperature is around 47°F. Additionally, it also received Energy Star Certification for use in Cold Climate areas, with an HSPF2-5 rating of 7.6. HSPF2-5 covers climates in Zone 5 including New York, Illinois and Minnesota where the average winter temperature is around 35°F, making it suitable for use with colder climates and higher heating demands. We do not recommend this unit as a primary heat source in northern climates.
 
Mr. Cool 5th Gen systems are made for easy installation for the DIYer in you. Everything you need to install your single zone system with 25 feet of line is included in this package. (Line set installation kits for longer runs will be available soon as well.) Your system includes pre-charged lines so there is no need for an installer. To install this single zone mini split system all you need is a few hours and some regular tools. Nothing special is required. The MRCOOL 5th Generation mini splits are energy efficient, include a SmartController WiFi control module that features an easy setup process, improved functionality, and the SmartHVAC app works with both Amazon Alexa and Google Assistant. Also included is WiFi access for control anywhere you have a connection. It can be used with Android or Apple smart phones or tablets. 
5th Gen features
Included with your Mr. Cool Single Zone 5th Gen DIY Mini Split System is a DIY Pro Cable. It is 25 feet and is included with the condenser. It features crimped connectors as well as protective conduit covering for long lasting use. It connects from the outdoor unit to the indoor unit. When adding length the the original 25' line set, you will need to replace the Pro-Cable that is included and replace with the new wire included with the couplers. 
 
The MRCOOL Smart Controller offers many features:
  • Global Control - Control your MRCOOL air conditioner or heat pump via your smartphone from anywhere in the world
  • Weekly Scheduling - 7 day scheduling functionality helps you schedule your air comfort per your preferred settings and time
  • Filter Maintenance Reminder
  • Geo Fencing - Automatically turn your system on before you arrive and switch off automatically after you have left
  • Usage Statistics - Keep track of your usage to control your costs helping you save energy, and money!
  • Timeline of Actions - See who is using the AC and their settings
The whole system ships in two packages. The indoor unit ships with all the required hardware needed for installation including a wall template and mounting plate, wall sleeve (to send the piping and line set through), a remote and the SmartController. A 25' line set and 25 ft. Pro-Cable is included in the box with the condenser unit. 
 
If you need more than the included 25 ft. line set, we have packaged the line sets with everything you need to achieve your required length up to 75 ft. 75 ft. is the longest length allowable for the DIY systems. DIY line sets and DIY Couplers are available to extend the line set to accommodate your installation needs. The lines are fully charged with R454B refrigerant. Each "Line Set Install Kit" over 25 ft. will include the necessary couplers required to connect more than one length of piping. Couplers are available with 75' of Pro-Cable to accommodate your new line length. When adding length to the original 25' line set, you will need to replace the Pro-Cable included. The Line Set Install Kits will include the following:
 
LINE SET INSTALL KIT NO-VAC LINE SET(s) INCLUDED DIY COUPLER and WIRE KIT INCLUDED  
25 Ft. DIY25-1438D NA Will include 25 ft. length of Pro-Cable with unit.
Additional line set lengths and couplers will be available soon
50 Ft. DIY25-1438D
DIY25-1438D
1 - DIYCOUPLER-1438K75D Will include 75 ft. length of Pro-Cable and required couplers. The excess cable will need to be coiled as it cannot be cut.
75 Ft.

DIY25-1438D
DIY50
-1438D

1 - DIYCOUPLER-1438K75D Will include 75 ft. length of Pro-Cable and required couplers. The excess cable will need to be coiled as it cannot be cut.
 
The outdoor unit features variable speed DC inverter compressor technology to help cut your energy costs without losing any benefits. It operates in the cooling mode down to -13°F. This makes it an ideal solution for use in computer server rooms, greenhouse and other areas that need to be kept cool year round. It will also operate in the heating mode down to -13°F as well. Gold Fin finish will help your condenser resist corrosion for years. The Gold Fin® Condenser provides superior corrosion resistance for coastal homes, ensuring long-lasting performance in harsh conditions.
 
Other features include:
  • Follow Me Feature - by pressing the 'follow me' button and keeping the remote close to you, you tell the air conditioner to set the temperature from wherever the remote happens to be, this counteracts the tendency for the air conditioner to stop cooling or heating because the air around the unit has reached its set temperature
  • Auto Restart - in the event of power loss the system will restart when power is restored
  • Breeze Away - avoids airflow from blowing directly on you. Louver will automatically set to a 35° angle and the fan will adjust to maintain a cool atmosphere
  • Wireless control with SmartHVAC controller installed (and app)
  • Louver Memory - horizontal louver will automatically move to the same position it was last set to
  • Leakage Detection - if your system detects low coolant, an alarm will sound to alert you and to help prevent damage to your system
  • Sleep Mode -  automatically adjusts the temperature to maximize comfort during night time sleep. When in COOL mode, the unit will increase the temperature by 2°F after 1 hour, and will increase an additional 2°F after another hour. When in HEAT mode, the unit will decrease the temperature by 2°F after 1 hour, and will decrease an additional 2°F after another hour. After 8 hours operating in SLEEP mode, the system will continue to run at the final temperature setting.
  • Dry Mode - In DRY mode, the system will reduce the humidity of the air in the room for increased comfort. The system will automatically cycle between cooling and fan only modes to dehumidify the air.
  • Auto Cool
  • Auto mode feature - In the Auto mode, the system can logically choose the mode of Cooling or Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote control.
  • Gold Fin Condenser - Protection to resist long term corrosion
  • LED Controls
  • Variable 4 Speed Control
  • Fan Only Option
  • Temperature Range - the temperature can be set within a range of 62F - 86F in 1°F increments
Backed by an industry-leading warranty—including a limited lifetime warranty, a 7-year compressor warranty, and a 5-year parts warranty the 5th Generation Single Zone Mini-Split Air Handler is built for lasting reliability. Enjoy advanced technology, simple installation, and year-round comfort with confidence.

All specifications are preliminary and subject to change.

FREE SHIPPING ON ALL ORDERS!
MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi SmartController - 115 Volt - Energy Star - R454B Refrigerant
  • MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi SmartController - 115 Volt - Energy Star - R454B Refrigerant
  • MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi Smart Controller - 115 Volt - Energy Star - R454B Refrigerant - 25 Ft. Line Set
  • MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi Smart Controller - 115 Volt - Energy Star - R454B Refrigerant - 25 Ft. Line Set
  • MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi Smart Controller - 115 Volt - Energy Star - R454B Refrigerant - 25 Ft. Line Set
  • MRCOOL DIY-12 12000 BTU DIY 5th Gen DIY Single Zone Mini Split with Heat Pump - WiFi Smart Controller - 115 Volt - Energy Star - R454B Refrigerant - 25 Ft. Line Set
  • +2

Product Overview

The only do it yourself (DIY), easy to install mini split air conditioner available. 

Energy Star Qualified System with Wireless-Enabled Smart Controller INCLUDED!

Mr. Cool Do It Yourself (DIY) Single Zone Mini Split System is offered in sizes to fit all of your installation needs. The 5th Generation Systems are available in BTUs from 9,000 for smaller room (up to 400 sq. ft.) installations up to 36,000 BTUs (up to 1550 sq. ft.) for those large spaces! All single zone systems, with the exception of the 36,000 BTU system, are Energy Star Certified, meeting strict energy efficiency ratings. Many of these systems also meet even more stringent qualifications for Energy Star Certification in Cold Climates. Cold Climate certification tests units down to 5° to ensure heat all winter. For you, as a consumer, this means energy cost savings overall, while still maintaining the comfort level you want! While the 36,000 BTU system is not Energy Star Certified, it still offers great efficiency ratings.  
 
The Mr. Cool 5th Generation DIY single zone systems now use R454B refrigerant for lower Global Warming Potential (GWP). While some manufacturers have chose the R32 refrigerant, Mr. Cool condensers chose R454B. R454B features a Global Warming Potential (GWP) of 467 - the most environmentally friendly refrigerant available. The larger the GWP, the more that specific gas warms the Earth. Below is a comparison chart of GWPs now being used by manufacturers versus R410A which is being phased out. 
 
GWP Refrigerant Comparison
 
With 12,000 BTUs, the DIY-12 system will cool a space that is about 550 sq. ft. This system uses 115 Volt electricity so it is easy to incorporate into almost any home or office. It is Energy Star Certified, boasting high ratings including 12.5 EER2, 23.5 SEER2 and 10.2 HSPF2-4 ratings. HSPF2-4 covers climates in Zone 4 including Florida, Texas and California where the average winter temperature is around 47°F. Additionally, it also received Energy Star Certification for use in Cold Climate areas, with an HSPF2-5 rating of 7.6. HSPF2-5 covers climates in Zone 5 including New York, Illinois and Minnesota where the average winter temperature is around 35°F, making it suitable for use with colder climates and higher heating demands. We do not recommend this unit as a primary heat source in northern climates.
 
Mr. Cool 5th Gen systems are made for easy installation for the DIYer in you. Everything you need to install your single zone system with 25 feet of line is included in this package. (Line set installation kits for longer runs will be available soon as well.) Your system includes pre-charged lines so there is no need for an installer. To install this single zone mini split system all you need is a few hours and some regular tools. Nothing special is required. The MRCOOL 5th Generation mini splits are energy efficient, include a SmartController WiFi control module that features an easy setup process, improved functionality, and the SmartHVAC app works with both Amazon Alexa and Google Assistant. Also included is WiFi access for control anywhere you have a connection. It can be used with Android or Apple smart phones or tablets. 
5th Gen features
Included with your Mr. Cool Single Zone 5th Gen DIY Mini Split System is a DIY Pro Cable. It is 25 feet and is included with the condenser. It features crimped connectors as well as protective conduit covering for long lasting use. It connects from the outdoor unit to the indoor unit. When adding length the the original 25' line set, you will need to replace the Pro-Cable that is included and replace with the new wire included with the couplers. 
 
The MRCOOL Smart Controller offers many features:
  • Global Control - Control your MRCOOL air conditioner or heat pump via your smartphone from anywhere in the world
  • Weekly Scheduling - 7 day scheduling functionality helps you schedule your air comfort per your preferred settings and time
  • Filter Maintenance Reminder
  • Geo Fencing - Automatically turn your system on before you arrive and switch off automatically after you have left
  • Usage Statistics - Keep track of your usage to control your costs helping you save energy, and money!
  • Timeline of Actions - See who is using the AC and their settings
The whole system ships in two packages. The indoor unit ships with all the required hardware needed for installation including a wall template and mounting plate, wall sleeve (to send the piping and line set through), a remote and the SmartController. A 25' line set and 25 ft. Pro-Cable is included in the box with the condenser unit. 
 
If you need more than the included 25 ft. line set, we have packaged the line sets with everything you need to achieve your required length up to 75 ft. 75 ft. is the longest length allowable for the DIY systems. DIY line sets and DIY Couplers are available to extend the line set to accommodate your installation needs. The lines are fully charged with R454B refrigerant. Each "Line Set Install Kit" over 25 ft. will include the necessary couplers required to connect more than one length of piping. Couplers are available with 75' of Pro-Cable to accommodate your new line length. When adding length to the original 25' line set, you will need to replace the Pro-Cable included. The Line Set Install Kits will include the following:
 
LINE SET INSTALL KIT NO-VAC LINE SET(s) INCLUDED DIY COUPLER and WIRE KIT INCLUDED  
25 Ft. DIY25-1438D NA Will include 25 ft. length of Pro-Cable with unit.
Additional line set lengths and couplers will be available soon
50 Ft. DIY25-1438D
DIY25-1438D
1 - DIYCOUPLER-1438K75D Will include 75 ft. length of Pro-Cable and required couplers. The excess cable will need to be coiled as it cannot be cut.
75 Ft.

DIY25-1438D
DIY50
-1438D

1 - DIYCOUPLER-1438K75D Will include 75 ft. length of Pro-Cable and required couplers. The excess cable will need to be coiled as it cannot be cut.
 
The outdoor unit features variable speed DC inverter compressor technology to help cut your energy costs without losing any benefits. It operates in the cooling mode down to -13°F. This makes it an ideal solution for use in computer server rooms, greenhouse and other areas that need to be kept cool year round. It will also operate in the heating mode down to -13°F as well. Gold Fin finish will help your condenser resist corrosion for years. The Gold Fin® Condenser provides superior corrosion resistance for coastal homes, ensuring long-lasting performance in harsh conditions.
 
Other features include:
  • Follow Me Feature - by pressing the 'follow me' button and keeping the remote close to you, you tell the air conditioner to set the temperature from wherever the remote happens to be, this counteracts the tendency for the air conditioner to stop cooling or heating because the air around the unit has reached its set temperature
  • Auto Restart - in the event of power loss the system will restart when power is restored
  • Breeze Away - avoids airflow from blowing directly on you. Louver will automatically set to a 35° angle and the fan will adjust to maintain a cool atmosphere
  • Wireless control with SmartHVAC controller installed (and app)
  • Louver Memory - horizontal louver will automatically move to the same position it was last set to
  • Leakage Detection - if your system detects low coolant, an alarm will sound to alert you and to help prevent damage to your system
  • Sleep Mode -  automatically adjusts the temperature to maximize comfort during night time sleep. When in COOL mode, the unit will increase the temperature by 2°F after 1 hour, and will increase an additional 2°F after another hour. When in HEAT mode, the unit will decrease the temperature by 2°F after 1 hour, and will decrease an additional 2°F after another hour. After 8 hours operating in SLEEP mode, the system will continue to run at the final temperature setting.
  • Dry Mode - In DRY mode, the system will reduce the humidity of the air in the room for increased comfort. The system will automatically cycle between cooling and fan only modes to dehumidify the air.
  • Auto Cool
  • Auto mode feature - In the Auto mode, the system can logically choose the mode of Cooling or Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote control.
  • Gold Fin Condenser - Protection to resist long term corrosion
  • LED Controls
  • Variable 4 Speed Control
  • Fan Only Option
  • Temperature Range - the temperature can be set within a range of 62F - 86F in 1°F increments
Backed by an industry-leading warranty—including a limited lifetime warranty, a 7-year compressor warranty, and a 5-year parts warranty the 5th Generation Single Zone Mini-Split Air Handler is built for lasting reliability. Enjoy advanced technology, simple installation, and year-round comfort with confidence.

All specifications are preliminary and subject to change.

Tech Specs

Indoor Unit Type:
Wall Mount

General Features

Bundle Includes:
Indoor and Outdoor Unit, Choice of Line Set Kit
Refrigerant:
R454B
Compressor:
Inverter
Energy Star:
Yes
Dehumidification (pts/hr):
NA
CFMs:
NA
Fan Speeds:
5
Min. Indoor Noise Level (dBA):
18
Outdoor Noise Level (dBA):
54
Includes Heat Pump:
Yes

Performance Data

Cooling BTUs:
12000
EER2:
12.5
SEER2:
23.5
Heat Pump BTUs:
12000
COP:
NA
HSPF4 (non-ducted):
10.2
HSPF5 (non-ducted):
7.6

Features

Control Type:
Hand Held Remote
Connectivity:
Module Included
Wired Thermostat Optional:
No
Inverter Technology:
Yes

Piping / Line Set Requirements

Line Set Liquid Line:
1/4"
Line Set Suction Line:
3/8"
Pipe Length (No Addl Refr Req):
25
Max. Pipe Length (ft.):
82
Max. Height Difference (Indoor / Outdoor) (ft.):
33

Operating Range

Ambient Temperature Range - Cooling:
NA
Ambient Temperature Range - Heating:
NA
Min. Outdoor Temp for Heat °F:
NA

Weights and Dimensions

Indoor Unit

Width (in.):
31.57
Depth (in.):
7.44
Height (in.):
11.69
Weight (lbs.):
24.03

Outdoor Unit

Width (in.):
30.12
Depth (in.):
11.93
Height (in.):
21.85
Weight (lbs.):
65.7
Certifications:
Energy Star, AHRI, UL Listed

Electrical Requirements

Voltage:
110-120V
Amps:
18
Circuit Breaker Size (Amps):
20
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Product Warranty

The unit comes standard with a 5 Year Parts/7 Year Compressor Warranty and is available with a Limited Lifetime Compressor Warranty with certain conditions/requirements.

The Limited Lifetime Compressor Warranty & the 7 Year Unit Replacement Warranty covers the unit ONLY in the event of compressor failure. In order to qualify for the Limited Lifetime Compressor Warranty, the unit must be registered at the web address (https://mrcool.com/warranty/) within 60 days of the installation date AND the original, registered owner must also enroll in the MrCool Care Program within 4 months from the installation date, which has a biannual fee to be covered by the owner. The MrCool Care Program is designed to provide the owner with a Do-It-Yourself cleaning kit to service/clean the unit at regular intervals (biannually) as preventative maintenance to help ensure the unit will continue to function properly throughout its lifespan.