Product Overview
Mr. Cool is proud to announce the NEW DIY Ceiling Cassette with WiFi Capability!
This is the indoor unit only. The 12,000 BTU unit can be used with ANY Mr. Cool Multi Zone outdoor condenser.
Mr. Cool DIYCASSETTE12HP-230C25 is a 12,000 BTU indoor ceiling cassette for use with the Mr. Cool DIY Multi-Zone outdoor compressors only. The indoor unit includes 25 ft. of DIY Pro Cable and a remote
control as well as a SmartHVAC control module for WiFi accessibility. The system can work either on your phone or computer and works with both Amazon Alexa as well as Google Assistant..
This innovative ceiling cassette is a low-profile unit that blends seamlessly into any installation. It is designed to work with standard 16" on center ceiling joists or pre-manufactured I-Joists. It is easily installed between the joists and secured with screws. Mr. Cool Quick Connect Line Sets (sold separately) help make installation easier!
With the Mr. Cool Ceiling Cassette, replacing the air filter is easy as well. The ceiling cassette is designed with an air filter panel that can be lowered and raised, remotely, for easy filter cleaning or replacement. Simply activate the Elevation Function and the filter panel will lower automatically - no ladder required!
Some other features include:
- 4 Fan Settings (Low/Medium/High/Super High)
- Auto Mode - Automatically selects Cool, Heat or Fan Only
- Dry Mode - Temperature is regulated while dehumidifying by intermittently switching the COOL or FAN modes on and off. The fan speed is set to LOW.
- Cool / Heat / Fan Modes
- Sleep Mode - 24 hour comfort even when you sleep - temperature decreases by 2° per hour for the first 2 hours and holds that temperature for 6 hours - saving you money and letting you rest easy
- Installs between traditional 16" on center ceiling joists and pre-manufactured I-joists
As with other Mr. Cool DIY systems, the DIY Multi-Zone indoor units are easy to install and do not require an HVAC installer. Ceiling installation is easy and connecting the line sets from the indoor unit to the outdoor unit require only a small, 3.54" hole through the walls and then out to the condenser. Mr. Cool Pre-Charged Quick Disconnect Line Sets are pre-charged and no vacuuming is required. The line sets are kink resistant and leak proof. They are the only line sets to be used with the Mr. Cool DIY multi-zone and single zone* systems. They are sized for 1/4 x 1/2 connections for use with the 9,000, 12,000 and 18,000 BTU indoor units.
Your Mr. Cool indoor wall unit comes with 25 feet of DIY Pro Cable. This length of wire is appropriate for a 25 ft. line set. If you are planning on longer line set lengths, you will need to add a coupler to join the line sets and additional Pro-Cable. MrCool DIY Couplers will be packaged with Pro-Cable for an unbroken run from the indoor unit to the outdoor unit. Simply disconnect the 25 foot length of cable and replace it with the new cable included with your coupler. The Pro-Cable features crimped connectors as well as protective conduit covering for long lasting use. It connects from the outdoor unit to the indoor unit.
Tech Specs
Performance Data
System Data
Features
Piping / Line Set Requirements
Weights and Dimensions
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov