Product Overview
Valid now through 12/5/24
Now is the time to think about bringing your unused wood-burning fireplace back to life. Even if you do not have an unused fireplace, the Simplifire 30" Built-In Electric Fireplace can be installed just about anywhere! Adding the traditional look of a fireplace to your home has never been this easy. Adding it to your existing masonry fireplace will enhance your room and add ambience you never knew was missing! The Simplifire Built-In Fireplace features a detailed masonry-style interior and a textured log set. It includes a full function remote control. The fireplace operates with or without heat and includes four flame effects, thermostatic control and a timer. If you think you are gonna doze off while enjoying your electric fireplace the time can be set from 1/2 hour up to 9 hours in 1 hour increments. Like the name says - fire made simple!
The Simplifire 30" built-in fireplace can be framed into a wall or installed into a pre-existing fireplace. Everything you need is included in the box for installation into an existing fireplace. Front facing installation requires 31-3/4"w x 11-5/8"d. The height for 120V is 27-1/4" while the height requirement for 240V is 29-1/4". Pre-construction installation (or any installation) on a sub-floor requires additional height to accommodate finished flooring thickness. This unit can also be installed in a corner installation with additional framing dimensions. See installation instructions for more detailed instructions. A front, black trim (SF-EF30-BK) is available (sold separately). Adding a front trim creates a 2" overhang to help cover drywall transitions. This will make for a more finished look to your installation.
A 120V power supply cord is included for plug-in use, but can also be hardwired either as 120V or 240V. When hardwired to a 240V supply, a minimum of 2" above the top of the firebox is required. The Simplifire built-in fireplace will operate with or without the flame. The firebox itself measures 31"w x 118"d with a beautiful clear 28-1/2" x 22-3/4" viewing area. It can be direct wired into 120V or 240V, 15 amp dedicated circuit. It can be operated manually from the front panel or with the included multi-function remote. With so many innovative features, you will wonder why you never had an electric fireplace before!
The Simplifire 30" built-in fireplace features a large viewing area with tight, flush finish for a clean look. The included remote offers intuitive, multifunction control at your fingertips. With an electric fireplace such as the SF-BI30-EB you can be enjoying the ambiance of a fire year-round, with or without heat. The fireplace offers 5,000 BTUs (120V) or 10,000 BTUs (240V), depending on choice of power input and you will never need to replace the bulbs thanks to LED flame technology.
The detailed masonry-style interior, textured log set and four-step flame intensity adjustments enhance the appeal of the SimpliFire Built-In electric fireplace series.
Additional electrical specifications for the Simplifire 30" built-in fireplace include:
| VOLTS | ||
| 120 | 240 (Hardwired) |
|
| Approx. BTUs: | 4800 | 10000 |
| Wattage: | 1400 | 2800 |
| Amps: | 11.7 | 11.7 |
This appliance is not intended for use as a primary heat source and should not be factored as such in residential heating calculations.
Some photos may illustrate other sizes of the Simplifire Built-In Fireplace. Specifications are subject to change.
Tech Specs
General Features
Performance
Weights and Dimensions
Framing Dimensions
Electrical Requirements
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
