Product Overview
A direct-vent fireplace is a sealed fireplace system. It is designed for installation into a wall or mantel. This contemporary style linear fireplace features a clean face design with a low profile. The electronic ignition has a battery back-up for continued operation even in a black-out / power outage. The beautiful DRL3500 Series is a fully equipped fireplace, packaged standard with a variable speed blower and multi-function remote control. Mood-enhancing floor lighting includes six distinctive settings to help customize your fireplace to your mood! This linear fireplace ships standard with tempered glass and a protective barrier screen, meeting all ANSI Z21.88 barrier requirements.
The reflective, crushed platinum glass media* on the floor of the firebox offers a fabulous bed for the dancing flames to rise through. This fireplace ships standard with a painted black interior but a black reflective porcelain liner is available (sold separately). The reflective liner offers a more dimensional flame effect in your fireplace.
Also included standard on the DRL3500 Series is the variable speed blower. The blower offers six speed settings to help circulate the heat , allowing you the option of fine tuning it to your personal comfort level. Additionally, the multi-function remote includes a thermostat, flame height, blower and lighting control. So even when you are sitting in your comfy spot, you can adjust everything to your specific heating needs and visual aesthetics.
Although not required, decorative surrounds are also available (sold separately) for the DRL3535 Series. These include a matte black surround and a stainless surround. The black surround is shown in the photos above. The clean face of the fireplace offers integrated tile stops for easy finishing.
This fireplace uses 4.5" / 7.5" Venting Components. A termination kit is required to finish off the outside of your system.
Gas Pressure Requirements:
- Inlet Gas Supply Pressure: 5.0 WC (Min.); 14" WC (Max.)
- Manifold Gas Supply Pressure: 3.5" WC
- 3/8" NPT Threads
Professional installation by a certified gas technician is required.
*Glass media, driftwood log set and stones can be mix and match but if you are using the driftwood and/or stones, the glass media must also be used. All Decorative Media is available separately or with this appliance in the Add to Cart box above.
Tech Specs
General Features
Performance
Venting
Gas Requirements
Weights and Dimensions
Firebox Framing Dimensions
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Product Warranty
20 Year Limited Warranty - EXCLUSIONS AND LIMITATIONSThis 20 Year Limited Warranty applies only if the Product is installed in the United States or Canada and only if operated and maintained in accordance with the printed instructions accompanying the Product and in compliance with all applicable installation and building codes and good trade practices. This warranty is non-transferable and extends to the original owner only. The Product must be purchased through a listed supplier of IHP and proof of purchase must be provided. The Product body and firebox carry the 20 Year Limited Warranty from the date of installation. Vent components, trim components and paint are excluded from this 20 Year Limited Warranty.
The following do not carry the 20 Year Limited Warranty but are warranted as follows:
- Burner – Repair or replacement for one year from the date of installation
- Gas components – Repair or replacement for one year from the date of installation
- Gaskets – Repair or replacement for one year from the date of installation
- Logs – Replacement for one year from the date of installation against thermal breakage only
- Optional blowers & remote controls – Repair or replacement for one year from the date of installation
- Optional glass doors – Repair or replacement for 90 days from the date of installation
- Tempered Glass -Replacement for one year from the date of installation
