Product Overview
A direct-vent fireplace is a sealed fireplace system. It is installed into a wall and offers maximum installation flexibility with combination top or rear venting. This Superior DRT3535 comes complete with an Oak Log Set, decorative grate and glowing embers and volcanic stones for a fabulously realistic-looking fire. This fireplace also features six setting interior lighting and includes a full function ProFlame II Remote (thermostat, flame, six speed blower, lighting and IPI/CPI) and an energy saving intermittent pilot ignition with standard high/low flame control. The fireplace is concealed and features standard ceramic glass with barrier screen that meets ANSI Z21.50/88 barrier requirements. It boasts a clean, full view face with a heat-circulating design.
A facade (or front) and a liner are both required but not included. There are five facade options as shown below. The Vista Facade is an inside fit. A stainless steel surround is available for use with the Vista facade and is installed as a 4-sided installation. The Craftsman and Reflection Facade options are all overlap fitting facades. There are four liner options available (sold separately). All are ceramic fiber with the exception of the black which is porcelain.
Because it is a gas direct vent fireplace, it will operate during a power outage. The electronic ignition provides seamless battery backup in the event of a power outage with its standard IPI/CPI switch for easier operation during outages. However, the blower will not operate.
This fireplace uses 4.5"/7.5" Secure Vent Rigid and Flex Direct Vent Components. A termination kit is required to finish off the outside of your system.
This fireplace system uses Natural Gas has a BTU Input Max. Rating of 26,000 BTUs and 17,000 BTUs Min. with a Thermal Efficiency rating of 62.5%.
Gas Pressure Requirements:
- Inlet Gas Supply Pressure: 5.0" WC (Min.); 10.5" WC (Max.)
- Manifold Gas Supply Pressure: 3.5" WC
- 3/8" NPT Threads
This direct vent fireplace is a combination top/rear vent unit for installation flexibility and is for use with natural gas. It is also available for use with liquid propane - DRT3535DEP-E.
Professional installation by a certified gas technician is required.
For help in building your venting needs, a full listing of venting components can be found under Manuals and Guides. Please call for pricing and availability.
Tech Specs
General Features
Performance
Venting
Gas Requirements
Weights and Dimensions
Firebox Framing Dimensions
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Product Warranty
20 Year Limited Warranty - EXCLUSIONS AND LIMITATIONSThis 20 Year Limited Warranty applies only if the Product is installed in the United States or Canada and only if operated and maintained in accordance with the printed instructions accompanying the Product and in compliance with all applicable installation and building codes and good trade practices. This warranty is non-transferable and extends to the original owner only. The Product must be purchased through a listed supplier of IHP and proof of purchase must be provided. The Product body and firebox carry the 20 Year Limited Warranty from the date of installation. Vent components, trim components and paint are excluded from this 20 Year Limited Warranty.
The following do not carry the 20 Year Limited Warranty but are warranted as follows:
- Burner – Repair or replacement for one year from the date of installation
- Gas components – Repair or replacement for one year from the date of installation
- Gaskets – Repair or replacement for one year from the date of installation
- Logs – Replacement for one year from the date of installation against thermal breakage only
- Optional blowers & remote controls – Repair or replacement for one year from the date of installation
- Optional glass doors – Repair or replacement for 90 days from the date of installation
- Tempered Glass -Replacement for one year from the date of installation
