Product Overview
White Mountain Hearth Driftwood Burncrete Log Set offers a dramatic focal point in a vent-free firebox or a gas equipped fireplace. The beautiful detail of Driftwood found at the beach or waterside is captured in this hand-crafted log set. The log set includes rich detail and showcases the different textures and wear found on real driftwood. Additionally the charred insides add a very realistic look to your gas fire logs. The 18" log set includes 8 pieces and the 24" and 30" each include 10 pieces. Whichever size you need for your installation, the Driftwood log set stacks impressively on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch firebox without getting lost.
With internal ceramic beads forcing the gas to move around inside the burner tubes, the Empire Slope Glaze Burners create a more representative flame pattern, complete with dancing flames through and around the log stack. Because a Slope Glaze Burner is lower in the front and a bit higher in the back, your logs will stack nicely. Vent-free gas logs generate consistent, controlled heat, without the mess, flare-ups and die-downs of a wood-burning fire. Forget chopping, stacking and lugging wood, with a gas fire log set you get the look without the hassle!
Burncrete Driftwood Logs are available in 18" (LS18-CD), 24" (LS24-CD) and 30" (LS30-CD) sizes. To correspond to your log set size, White Mountain Hearth's Slope Glaze Burners are available in 18", 24" and 30" sizes with several valve options to help meet your needs:
- VFSM - Manual (No Remote Available) - operates manually with Off/Pilot/3 position heat setting knob; Cannot be used with wall thermostat or remotes
- VFSR - Millivolt (Remote Available, Not Included) - Standing Pilot, On/Off Remote Ready, Manual Hi/Lo temperature regulator knob (Available Remotes / Thermostats - sold separately)
- VFSV - Variable Flame, Height Control (Includes Remote) - Standing pilot with four level flame height control.
- VFSE - Intermittent Pilot (Programmable Remote Included) - Electronic Ignition with Remote Thermostat and Variable Flame Height Control
Both the VFSM (Manual) and VFSV (Variable) models are certified for installation in a vented fireplace. When installed in a vented application, each can only be used as a decorative gas appliance and cannot be operated with a remote. Your installer must block the fireplace damper partially open. A Damper Clamp is included for this purpose.
Your complete set will include the Burncrete Driftwood Logs and Burner/Grate Assembly (size, fuel type and valve chosen), Decorative Rocks, Glowing Embers (rock wool) for burner coverage, Valve Shield (VFSM model) and installation screws and damper clamp. The VFSV and VFSE models will include the Remote Kit.
| BTUs (Min./Max.) | Req. Min. Rear Width (in.) (A) | Req. Min. Depth (in.) (B) | Req. Min. Front Width (in.) (C) | Req. Min. Height (in.) (D) | |
|---|---|---|---|---|---|
| 18" Slope Glaze Burners: | |||||
| VFSM - Manual Valve: | 22,000 / 32,000 | 21" | 14" | 32" | 17" |
| VFSR- Millivolt Valve: | 22,000 / 32,000 | 17" | 14" | 28" | 17" |
| VFSV- Variable Flame Height: | 21,000 / 32,000 | 17" | 14" | 28" | 17" |
| VFSE- Intermittent Pilot: | 26,000 / 32,000 | 17" | 14" | 28" | 17" |
| 24" Slope Glaze Burners: | |||||
| VFSM - Manual Valve: | 22,000 / 36,000 | 27" | 14" | 34" | 18" |
| VFSR- Millivolt Valve: | 25,000 / 36,000 | 23" | 14" | 30" | 18" |
| VFSV- Variable Flame Height: | 24,000 / 36,000 | 23" | 14" | 30" | 18" |
| VFSE- Intermittent Pilot: | 28,800 / 36,000 | 23" | 14" | 30" | 18" |
| 30" Slope Glaze Burners: | |||||
| VFSM - Manual Valve: | 22,000 / 38,000 | 30" | 14" | 38" | 20" |
| VFSR- Millivolt Valve: | 26,000 / 38,000 | 26" | 14" | 34" | 20" |
| VFSV- Variable Flame Height: | 27,000 / 38,000 | 26" | 14" | 34" | 20" |
| VFSE- Intermittent Pilot: | 30,000 / 38,000 | 26" | 14" | 34" | 20" |
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
State and local codes in some areas prohibit the use of vent free products.
PLEASE CHECK YOUR LOCAL BUILDING CODES BEFORE ORDERING OR INSTALLING A VENT FREE PRODUCT.
Tech Specs
General Features
WARNING!
![White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners](https://cdn11.bigcommerce.com/s-7wqdm8gvmj/images/stencil/260x200/products/4746/10923/apihmdqcg__26326.1625689613.jpg?c=2 "White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners")
![White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners](https://cdn11.bigcommerce.com/s-7wqdm8gvmj/images/stencil/260x200/products/4749/10928/apim4iz4l__24802.1625689581.jpg?c=2 "White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners")
![White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners](https://cdn11.bigcommerce.com/s-7wqdm8gvmj/images/stencil/260x200/products/4751/10931/apisgyvxt__31834.1625689639.jpg?c=2 "White Mountain Hearth LR-18 2" Log Riser for Slope Glaze Vented/Vent Free Burners")
