Product Overview
Is your empty fireplace an eyesore in your home? Fill it with a White Mountain Hearth Charred Oak Ceramic Fiber Log Set with a Vented Burner. With a gas log set you can make your fireplace come alive again without the mess and hassle of wood. Vented burners are certified for use in existing fireplaces and need to be vented through an open chimney or flue. While vented burners feature a higher BTU input, which help to create taller flames, they are not for use as a heat source. When gas logs are used in a vented installation, they are certified for decorative use only and cannot be used with a thermostat. Vented burners are not convertible for use in a vent-free installation.
The 4-piece Ceramic Fiber Charred Oak logs are carefully hand painted to resemble Oak logs that have started to burn. The hand crafting and painting provides you with the most realistic looking logs. The Charred Oak log set offers an outstanding look for just about any gas-equipped fireplace. The log set features unsplit and broken logs, displaying realistic looking cracks and splits as it sits nicely on an Empire Slope Glaze burner. The 18" set will look great in a 32 inch fireplace. This Charred Oak Log Set is available in 18" (LS18-C2), 24" (LS24-C2) and 30" (LS30-C2). Vented burners are available in corresponding sizes. Ceramic beads inside the burner tubes force the gas to tumble around, contributing to the authentic flames and flickers between the logs for a beautiful fire. The VSR burner includes a millivolt valve with an On/Off Switch. The VSR burner can be operated with a remote control or wall switch (sold separately - see Accessories below).
Your complete Vented Log Set will include the 4-piece Ceramic Fiber Charred Oak Log Set (your choice of size), Vented Burner Pan Assembly (choice of size, valve and fuel type), Glowing Embers, Damper Clamp, and Decorative Rock. The damper clamp is included to keep the damper from accidentally closing during use. Burners are not field convertible for use with any other fuel type and cannot be used in a vent-free installation.
A licensed gas technician is required for installation of this product. This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.Please check your local regulations as some areas may require inspection after installation of gas products. It is highly recommended that you use your own gas technician or gas provider for any repairs.
| VSR Slope Glaze Burner with Millivolt Valve | Input BTUs / Reduced Input BTUs* | Min. Front Width (in.) | Depth (in.) | Height (in.) |
|---|---|---|---|---|
| 18" Burner | 65,000 / 40,000 BTUs | 28 | 15 | 22 |
| 24" Burner | 75,000 / 50,000 BTUs | 30 | 15 | 22 |
| 30" Burner | 75,000 / 60,000 BTUs | 34 | 15 | 22 |
* An additional main burner orifice is provided to reduce the input of the burner assembly.
Tech Specs
General Features
WARNING!
