Williams Furnace Company 140382 14,000 BTU Gravity Direct Vent Wall Furnace

Sku:
WILLIAMS-FURNACE-140382
Usually Leaves Warehouse in 1 - 2 Weeks
$1,209.00
 
 
This direct-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 14,000 BTUs, works to safely distribute heat throughout any indoor space at minimal cost.
 
Ideal for use in garages, workshops, and bedrooms, this unit is conveniently compact - just 7 1/8 inches deep - for ample heat wherever you need it, without the loss of space. Its sealed combustion chamber completely seals the gas flame inside the unit and away from all contact with the air in the room for added safety, operating completely electricity-free for use even during a power outage.
 
Electricity is only required with installation of an optional blower (see accessories panel), which aids in the even and comfortable distribution of heat throughout the room.
 
This unit is a direct-vent furnace, which means that the air necessary for combustion is drawn directly into the chamber from the outside, allowing doors and windows to remain closed because no indoor air is used for combustion. The combustion products are then returned back through the vent to the outside, so that only clean, gentle, and consistent heat is delivered into the room. Direct-vent furnaces must be installed through an exterior (outside) wall, venting horizontally through the exterior wall. All vent material is included for quick and easy installation.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • Matchless pilot igniter
  • Attractive, durable soft-white, scratch-resistant finish
  • Sealed-combustion safety technology uses no inside room air for operation
  • All vent caps include built-in "Bird-Guard"
  • Heavy-duty cast iron burners
  • Read owner's manual before using/installing
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This model is available:
  • Natural Gas - 1403822 and Liquid Propane Gas - 1403821

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately.

FREE SHIPPING ON ALL ORDERS!
Williams Furnace Company 140382 14,000 BTU Gravity Direct Vent Wall Furnace
  • Williams Furnace Company 140382 14,000 BTU Gravity Direct Vent Wall Furnace
  • Williams Furnace Company 140382 14,000 BTU Gravity Direct Vent Wall Furnace
  • Williams Furnace Company 140382 14,000 BTU Gravity Direct Vent Wall Furnace
Product Video

Product Overview

 
 
This direct-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 14,000 BTUs, works to safely distribute heat throughout any indoor space at minimal cost.
 
Ideal for use in garages, workshops, and bedrooms, this unit is conveniently compact - just 7 1/8 inches deep - for ample heat wherever you need it, without the loss of space. Its sealed combustion chamber completely seals the gas flame inside the unit and away from all contact with the air in the room for added safety, operating completely electricity-free for use even during a power outage.
 
Electricity is only required with installation of an optional blower (see accessories panel), which aids in the even and comfortable distribution of heat throughout the room.
 
This unit is a direct-vent furnace, which means that the air necessary for combustion is drawn directly into the chamber from the outside, allowing doors and windows to remain closed because no indoor air is used for combustion. The combustion products are then returned back through the vent to the outside, so that only clean, gentle, and consistent heat is delivered into the room. Direct-vent furnaces must be installed through an exterior (outside) wall, venting horizontally through the exterior wall. All vent material is included for quick and easy installation.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • Matchless pilot igniter
  • Attractive, durable soft-white, scratch-resistant finish
  • Sealed-combustion safety technology uses no inside room air for operation
  • All vent caps include built-in "Bird-Guard"
  • Heavy-duty cast iron burners
  • Read owner's manual before using/installing
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This model is available:
  • Natural Gas - 1403822 and Liquid Propane Gas - 1403821

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately.

Tech Specs

General Features

Installation Type:
Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Vent Kit Included
Tilt Switch:
NA

Performance Data

Heating BTUs:
14000
Heating BTUs (Output):
10200

Venting

Type of Venting:
Direct Vent
Air Inlet Tube (in.):
6"
Flue Outlet Tube (in.):
4"

System Data

Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Wall Thermostat Required (NOT INCLUDED)

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
4.0" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
5.0" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
7.0" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
24
Bottom to Floor (in.):
1.188
To Side Wall (in.):
2

Weights and Dimensions

Width (in.):
18
Depth (in.):
7.125
Height (in.):
26.75
Net Weight (lbs.):
56
Certifications:
CSA
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov