null

Williams Furnace Company 250982 25,000 BTU Monterey Plus Top Vent Wall Furnace

Sku:
WILLIAMS-FURNACE-250982
Usually Leaves Warehouse in 1 - 2 Weeks
$1,265.00
 
Winter can be brutal - the process of choosing a furnace doesn't have to be. The Monterey top-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 25,000 BTU, works to safely distribute heat throughout any indoor space at minimal cost.
 
Easily installed as a recessed or as a surface-mount unit, this single-side furnace is great for use in homes, schools, cabins, apartments, and shops, for ample heat and comfort wherever it is required. Equipped with a "matchless" pilot ignition, this unit does not require electricity to run, allowing it to perform sufficiently even in the event of a power outage.
 
This unit is a top-vent furnace, which means that it is vented vertically up through the roof, so that all combustibles discharge directly outside. This way, the unit is able to be centrally (and safely) located inside the home and installed on the indoor wall of your choosing.
 
An optional blower can be attached to the top of your Monterey furnace, for improved circulation of warm air and reduced temperature differences in the room. Two models are available - the Standard 100 CFM Blower (model 2901) and a Deluxe Blower which offers 125 CFM (model 2907). Electricity is required to operate the optional blower.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • 71% AFUE / 77% Thermal Efficiency
  • May be installed surface-mount or recessed in the wall
  • 4" Side Clearance
  • Unique wall-mount design requires no floor space
  • All models include a "matchless" pilot igniter, for safe and easy pilot lighting
  • Standard features include safety controls and a resettable vent-limit safety switch 
  • Patented, side-relief opening draft hood reduces flue gas temperature to minimize normal heat loss
  • Featured in a soft-white, scratch resistant finish
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This model is available:
  • Natural Gas - 2509822 and Liquid Propane Gas - 2509821

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

FREE SHIPPING ON ALL ORDERS!
Williams Furnace Company 250982 25,000 BTU Monterey Plus Top Vent Wall Furnace

Product Overview

 
Winter can be brutal - the process of choosing a furnace doesn't have to be. The Monterey top-vent wall furnace by Williams Furnace Company is a highly efficient indoor heating unit that, operating at 25,000 BTU, works to safely distribute heat throughout any indoor space at minimal cost.
 
Easily installed as a recessed or as a surface-mount unit, this single-side furnace is great for use in homes, schools, cabins, apartments, and shops, for ample heat and comfort wherever it is required. Equipped with a "matchless" pilot ignition, this unit does not require electricity to run, allowing it to perform sufficiently even in the event of a power outage.
 
This unit is a top-vent furnace, which means that it is vented vertically up through the roof, so that all combustibles discharge directly outside. This way, the unit is able to be centrally (and safely) located inside the home and installed on the indoor wall of your choosing.
 
An optional blower can be attached to the top of your Monterey furnace, for improved circulation of warm air and reduced temperature differences in the room. Two models are available - the Standard 100 CFM Blower (model 2901) and a Deluxe Blower which offers 125 CFM (model 2907). Electricity is required to operate the optional blower.
 
Please select the type of fuel to be used and other options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat.
  • 71% AFUE / 77% Thermal Efficiency
  • May be installed surface-mount or recessed in the wall
  • 4" Side Clearance
  • Unique wall-mount design requires no floor space
  • All models include a "matchless" pilot igniter, for safe and easy pilot lighting
  • Standard features include safety controls and a resettable vent-limit safety switch 
  • Patented, side-relief opening draft hood reduces flue gas temperature to minimize normal heat loss
  • Featured in a soft-white, scratch resistant finish
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This model is available:
  • Natural Gas - 2509822 and Liquid Propane Gas - 2509821

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

Tech Specs

General Features

Installation Type:
Recessed / Surface Wall Mount
Fuel Type:
Choice NG / LP
Installation Kit:
Not Included

Peformance Data

Heating BTUs:
25000
Heating BTUs (Output):
19200
AFUE Efficiency:
71%

Venting

Type of Venting:
B-Vent
Vent Connection Size (in.):
Oval to 4" Round

System Data

Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Wall Thermostat Required (NOT INCLUDED)

Gas Requirements

Gas Connection Size:
1/2"
Manifold Pressure (in.):
4.0" w.c. (NG) / 10.0" w.c. (LP)
Inlet Gas Pressure (Min.):
5.0" w.c. (NG) / 11.0" w.c. (LP)
Inlet Gas Pressure (Max.):
7.0" w.c. (NG) / 13.0" w.c. (LP)

Clearances

Top to Ceiling (in.):
16
Bottom to Floor (in.):
2.5
To Side Wall (in.):
4

Weights and Dimensions

Width (in.):
16
Depth (in.):
6
Height (in.):
65.75
Net Weight (lbs.):
83
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov