Product Overview
The Williams 5001A Vented Hearth heater is 50,000 BTUs of heating power packed into a compact, efficient black enclosed front cabinet with front grille and top louvers for heat circulation throughout the room. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate, unless the factory installed blower is running. It vents to the outside with a B-Vent installation.
All wiring and controls are easily accessible from the front of the unit.
This console heater includes a factory installed blower. Electricity is required using the blower. A blower increases the circulation of your warm air for better distribution of heat.
- No electricity required (without blower)
- 4" Vent size
- Burners engineered for quiet ignition and maximum heat efficiency
- Resettable vent switch
- Convertible gas valves
- Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
- Read owner's manual before installing/operating
- Check local codes and ordinances for permitted uses
- Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
This heater with factory installed blower is available as:
- Natural Gas - 5001922A AND Liquid Propane Gas - 5001921A
It is also available without a blower (blower sold separately) to install yourself. Please select your options such as a high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase.
WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately.
Tech Specs
General Features
Performance Data
Connections
System Data
Clearances
Weights and Dimensions
Electrical Requirements
California residents see Prop 65 WARNINGS
WARNING!
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
