null

Williams Furnace Company 5001A 50,000 BTU Vented Hearth Heater with Enclosed Front

Sku:
WILLIAMS-FURNACE-5001A
Usually Leaves Warehouse in 1 - 2 Weeks
$1,642.00
 
The Williams 5001A Vented Hearth heater is 50,000 BTUs of heating power packed into a compact, efficient black enclosed front cabinet with front grille and top louvers for heat circulation throughout the room. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. It vents to the outside with a B-Vent installation.
 
All wiring and controls are easily accessible from the front of the unit.
 
An optional blower is available (sold separately) for this console heater. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • No electricity required (without blower)
  • 4" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This heater is available as:
  • Natural Gas - 5001522A AND Liquid Propane Gas - 5001521A

An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase.

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

FREE SHIPPING ON ALL ORDERS!
Williams Furnace Company 5001A 50,000 BTU Vented Hearth Heater with Enclosed Front
Product Video

Product Overview

 
The Williams 5001A Vented Hearth heater is 50,000 BTUs of heating power packed into a compact, efficient black enclosed front cabinet with front grille and top louvers for heat circulation throughout the room. It is equipped with a matchless pilot ignition for added safety and requires no electricity to operate. It vents to the outside with a B-Vent installation.
 
All wiring and controls are easily accessible from the front of the unit.
 
An optional blower is available (sold separately) for this console heater. Electricity is required when adding the blower to your unit. A blower increases the circulation of your warm air for better distribution of heat.
  • No electricity required (without blower)
  • 4" Vent size
  • Burners engineered for quiet ignition and maximum heat efficiency
  • Resettable vent switch
  • Convertible gas valves
  • Must be installed against a wall (minimum 6" clearance to the rear and 6" from side wall) and vented to the outside
  • Read owner's manual before installing/operating
  • Check local codes and ordinances for permitted uses
  • Servicing recommended by qualified service technician
Professional installation by a certified gas technician is required for this item.
 
This heater is available as:
  • Natural Gas - 5001522A AND Liquid Propane Gas - 5001521A

An optional blower is also available (field installed; sold separately) for this heater. It is also available with a factory installed blower. Please select your options such as an optional blower, high elevation kit (if you are 2001 ft. or more above sea level), and a thermostat at the time of purchase.

WILLIAMS FURNACE NO LONGER OFFERS FACTORY INSTALLED HIGH ELEVATION KITS. Williams furnaces come factory set for elevations up to 2000 feet above sea level. High elevation kits are sold separately. 

Tech Specs

General Features

Installation Type:
Freestanding
Fuel Type:
Choice NG / LP

Performance Data

Heating BTUs:
50000
CFMs:
NA
AFUE Efficiency:
68%

Connections

Gas Connection Size:
1/2"
Type of Venting:
B-Vent
Vent Connection Size (in.):
4"

System Data

Flame Type:
Not Visible
Blower:
Optional
Ignition Type:
Standing Pilot
Control Type:
Thermostatic

Clearances

Top to Ceiling (in.):
57"
To Side Wall (in.):
6"
To Rear Wall (in.):
6"
Access Side (in.):
24"
Flue / Vent Connector:
NA

Weights and Dimensions

Width (in.):
30
Depth (in.):
16
Height (in.):
32.875
Net Weight (lbs.):
103

Electrical Requirements

Voltage:
110-120V
Amps:
NA
Circuit Breaker Amps:
15
California residents see Prop 65 WARNINGS

Warning WARNING!

Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov